THE 37th BANGKOK INTERNATIONAL MOTOR SHOW 2016
11. Electric power
Use of electric power in construction work and for testing equipment requires submission of Form 3 and Form 4.
Electric power shall be supplied on the date and during the time requested only. Supply of electric power during
exhibition period shall commence on March 20, 2016 from 13.00 hours onwards subject to the Organizer’s
inspection outcome. If the booth is not ready or does not pass the inspection, the Organizer reserves the right to
withhold the electric supply until the booth becomes ready.
Rules and regulations for electrical system inspection
11.1 Safety shall be given first priority among all considerations. All electrical system installations shall be performed
by a skilled engineer or technician only. In case of incidence due to negligence causing power failure or short
circuit, the Organizer shall impose a point deduction penalty on the Service Provider.
11.2 Floor plan showing the location of electrical control point(s) within the booth shall be submitted to the Organizer
for approval before the installation commences.
11.3 A ground wire shall be installed to prevent electrical leakage.
11.4 The Organizer shall conduct wiring inspection and shall request for correction if any non-conformity is detected.
The Organizer shall strictly in no circumstance start supplying the electric power if the problem remains unsolved.
11.5 Feeding electric power for use during the exhibition period shall be based on the inspection performed by the
Organizer, whereby the Service Provider shall submit a request form for the said supply.
11.6 Piling construction materials and tools up on power cords and cables is strictly prohibited.
11.7 Metal electric tower or steel structure used for installing equipment or lamps shall be wired to other electrically
conductive tower and equipment.
11.8 Use of a dimming system or power saving system requires careful checking of its electrical rating. If the
incompatibility causes power failure, the Service Provider shall be liable for the total damage.
11.9 Installation of a lamp to provide lighting in the displayed vehicle is allowed under the condition that the lamp
and its cable joint are insulated to prevent direct contact; and the wiring shall not be through the vehicle door,
but preferably through the opening under the vehicle chassis.
11.10 Placing electric cords or cables on the floor and covering them with a carpet are strictly forbidden. Wiring
shall be properly installed.
Electrical services
1. The Organizer shall arrange for lighting in the exhibition hall during the working hours only, and shall turn off the
light 30 minutes after the closing hours.
2. The Official Electrical Service Provider for this exhibition is Exposition Technology Co., Ltd. Electrical system
installations in all standard booths shall be performed by Exposition Technology Co., Ltd. only.
3. The Organizer has provided the electric power supply for construction and demolition, in which the electricity will
be supplied in a sharing fashion. Thus, the electricity may not be adequately supplied if the size of the Exhibitor’s
booth is considerably large and require big amount of power supply. In order to prevent the construction work
from being completed behind the determined schedule and for your convenience, a specific power supply service
point can be provided with additional service charge accordingly to the specified timing as requested using Form
No.