360 5-4. Using the driving support systems
WARNING
lDo not disassemble, remodel or paint the camera.
lDo not attach accessories or stickers to the camera.
lDo not install market protection parts( bumper trim, etc.) to the
rear bumper.
lMaintain suitable tire air pressure.
lMake sure the back door is completely closed.
n When to disable the RCD function
In the following situations, disable the system. The RCD function may not operate properly, possibly leading to an accident.
lThe contents mentioned above are not observed.
lSuspensions other than the genuine parts are installed.
System component Location of the rear camera
A
RCD display
Pedestrian detection icon Displayed automatically when a pedestrian is detected behind the vehicle.
Turning the RCD function on / off
The RCD function can be enabled / disabled through a customize setting.( �P. 661)
When the RCD function is disabled, the driving assist information indicator( �P. 136) illuminates, and a message is displayed on the multi-information display. Each time the power switch is turned off then changed to ON, the RCD function will be enabled automatically.
When a pedestrian is detected
If a pedestrian is in the area behind the vehicle or if the rear camera detected that a pedestrian is approaching the vehicle