5-4. Using the driving support systems
355 turned off. At this time, a message will be displayed on the multi-information display. by flashing the outside rear view mirror indicators and sounding a buzzer.
Turning the RCTA function on / off
The RCTA can be enabled / disabled through a customize setting.( �P. 661)
When the RCTA function is off, the driving assist information indicator( �P. 136) will illuminate and a message will be displayed on the multi-information display. Each time the power switch is turned to ON, the RCTA function is enabled.
n Outside rear view mirror indicator visibility
In strong sunlight, the outside rear view mirror indicator may be difficult to see.
n Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear over loud noises, such as if the audio system volume is high.
n Rear side radar sensors �P. 336
RCTA function
n Operation of the RCTA function
The RCTA function uses rear side radar sensors to detect vehicles approaching from the right or left at the rear of the vehicle and alerts the driver of the presence of such vehicles
A Approaching vehicles
B Detection areas of approaching vehicles
n RCTA icon display
When a vehicle approaching from the right or left at the rear of the vehicle is detected, the following will be displayed on the multimedia display.
Example: Vehicles are approaching from both sides of the vehicle
n RCTA function detection areas
The areas that vehicles can be detected in are outlined below.
5
Driving