4-2. Opening, closing and locking the doors
165
Press the switch.
The power back door automatically closes.
Pressing the switch while the power back door is closing will stop the operation. When the switch is pressed again during the halted operation, the back door will perform the reverse operation.
• Close the back door and lock all doors( close & lock function)
Close all of the doors except the back door, carrying an electronic
key and press the switch on the lower part of the back door.
A different buzzer than the normal one will sound and the power back door will begin closing automatically. When the power back door is closed, all of the doors will lock simultaneously and operation signals will indicate that all of the doors have been locked.
Pressing the switch while the power back door is operating will stop the operation.
When the switch is pressed again during the halted operation, the power back door will be closed.
• Close the back door and lock all doors after moving away from the back door( close &
lock [ Walk-Away ] function) * *: This setting can be customized by your SUBARU retailer.
1 Close all of the doors except the back door, carrying an electronic key and press the
switch on the lower part of the back door.
A different buzzer than the normal one will sound and the close & lock( Walk-Away) function will go into standby.
2 While the buzzer is sounding, move away from the back door.
When the sensor detects that you are away from the back door, the emergency flashers will flash, and the buzzer will sound. Depending
on the direction of moving away from the back door, the location and
4
Before driving