56 1-2. Child safety
WARNING
lFollow all installation instructions provided by the child restraint system manufacturer.
lNever attach two child restraint system attachments to the
same anchor. In a collision, one anchor may not be strong enough to hold two child
restraint system attachments and may break.
If the LATCH anchors are already in use, use the seat belt
to install a child restraint system in the center seat.
lWhen securing some types of child restraint systems in rear seats, it may not be possible to properly use the seat belts in positions next to the child restraint without interfering with it or affecting seat belt effectiveness. Be sure your seat belt fits snugly across your shoulder and low on your hips. If it does not, or if it interferes with the child restraint, move to a different position. Failure to do so may result in death or serious injury.
lIf the seat is adjusted, reconfirm the security of the child restraint system.
Using an anchor bracket( for top tether strap)
n Anchor brackets( for top tether strap)
Anchor brackets are provided for each rear seat.
Use anchor brackets when fixing the top tether strap.
� Outboard rear seats
A Anchor brackets Top tether strap
� Rear center seat
A Anchor bracket Top tether strap
n Fixing the top tether strap to the anchor bracket
Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.