7-3. Do-it-yourself maintenance
537
Only type A fuse can be removed using the pullout tool.
� Type C
4 Check if the fuse is blown.
Replace the blown fuse with a new fuse of an appropriate amperage
rating. The amperage rating can be found on the fuse box lid.
� Type A
A Normal fuse Blown fuse
� Type B
A Normal fuse Blown fuse
nAfter a fuse is replaced
lWhen installing the lid, make sure that the tab is installed securely.
lIf the lights do not turn on even after the fuse has been replaced, a bulb may need replacement.
lIf the replaced fuse blows again, have the vehicle inspected by your SUBARU retailer.
nIf there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
nWhen replacing an electronic component, such as a lights, etc.
SUBARU recommends that you use
genuine SUBARU products designed for this vehicle. Because
certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable.
7
Maintenance and care
A
Normal fuse Blown fuse