536 7-3. Do-it-yourself maintenance
WARNING
n To prevent battery explosion or leakage of flammable liquid or gas
lReplace the battery with a new battery of the same type. If a wrong type of battery is used, it
may explode.
lDo not expose batteries to extremely low pressure due to
high altitude or extremely high temperatures.
lDo not burn, break or cut a battery.
NOTICE n When replacing the battery
Use a flathead screwdriver of appropriate size. Applying excessive force may deform or damage the cover.
n For normal operation after replacing the battery
Observe the following precautions to prevent accidents:
lAlways work with dry hands. Moisture may cause the battery to rust.
lDo not touch or move any other component inside the remote control.
lDo not bend either of the battery terminals.
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.
Checking and replacing fuses
1 Turn the power switch off.
Confirm that the charging connector is not connected.
2 Open the fuse box cover.
� Motor compartment Push the tab in and lift the lid off.
� Left side instrument panel Remove the lid.
3 Remove the fuse.