6-4. Using the other interior features
543
■ Enabling 2-way communication with a garage door( only available for compatible devices)
When enabled, 2-way communication allows you to check the status of the opening and closing of a garage door through indicators in your vehicle.
2-way communication is only available if the garage door opener motor used is a compatible device.( To check device compatibility, refer to www. homelink. com.) 1 Within 5 seconds after programming the garage door opener has been completed, if the garage door opener motor is trained to Home-
Link ®, both garage door operation indicators will flash rapidly( green) and the light on the garage door opener motor will blink twice, indicating that 2-way communication is enabled.
If the indicators do not flash, perform 2 and 3 within the first 10
presses of the HomeLink ® button after programming has been completed.
2 Press a programmed Home-
Link ® button to operate a garage door.
3 Within 1 minute of pressing
the HomeLink ® button, after the garage door operation has stopped, press the“ Learn” or“ Smart” button on the garage door opener motor. Within 5 seconds of the establishment of 2-way communication with the garage door opener, both garage door operation indicators in the vehicle will flash rapidly( green) and the light on the garage door opener motor will blink twice, indicating that 2-way communication is enabled.
■ Reprogramming a single HomeLink ® button
When the following procedure is performed, buttons which already have devices registered to them can be overwritten: 1 Press and hold the desired
HomeLink ® button.
2 When the HomeLink ® indicator starts flashing orange,
release the HomeLink ® button and perform“ Programming HomeLink ®” 1( it takes 20 seconds for the Home-
Link ® indicator to start flashing).
6
Interior features