5-4. Using the driving support systems
357
WARNING
●Do not disassemble, remodel or paint the camera.
●Do not attach accessories or stickers to the camera.
●Do not install market protection parts( bumper trim, etc.) to the
rear bumper.
● Maintain suitable tire air pressure.
●Make sure the back door is completely closed.
■ When to disable the RCD function
In the following situations, disable the system. The RCD function may not operate properly, possibly leading to an accident.
●The contents mentioned above are not observed
●Suspensions other than the genuine parts are installed
System component Location of the rear camera
RCD display
Pedestrian detection icon
Displayed automatically when a pedestrian is detected behind the vehicle.
Turning the RCD function on / off
The RCD function can be enabled / disabled through a customize setting.( �P. 682)
When the RCD function is disabled, the driving assist information indicator( �P. 140) illuminates, and a message is displayed on the multi-information display.
Each time the power switch is turned off then changed to ON, the RCD function will be enabled automatically.
5
Driving