5-4. Using the driving support systems
313
● When changing lanes
●When a preceding vehicle is driving at a low speed
●When a vehicle is stopped in the same lane as the vehicle
●When a motorcycle is traveling in the same lane as the vehicle
■ Conditions under which the system may not operate correctly
In the following situations, operate the brake pedal( or accelerator
pedal, depending on the situation) as necessary.
As the sensor may not be able to correctly detect a vehicle, the system may not operate properly.
●When a preceding vehicle brakes suddenly
●When changing lanes at low speeds, such as in a traffic jam
■ Conditions for extended resume time
Extended resume time is activated
when all of the following conditions are satisfied:
●Vehicles with an active trial or subscription to connected navigation. Contact your SUBARU dealer for
details.
● The vehicle is driving on a vehicleonly road, such as an expressway.
●There is a preceding vehicle and the system is able to detect it.
● No vehicle interruptions occur. ●The preceding vehicle has not been replaced.
●Clearance sonar and FCTA are not detecting the object in front of you.
●The driver monitor judges that the driver is looking forward.
●The steering wheel has not been operated.
●The brake pedal has not been operated.
Approach warning
In situations where the vehicle approaches a preceding vehicle and the system cannot provide sufficient deceleration, such as if a vehicle cuts in front of the vehicle, a warning display will flash and a buzzer will sound to alert the driver. Depress the brake pedal to ensure appropriate vehicle-to-vehicle distance.
■ Warnings may not occur when
In the following situations, the warning may not operate even though the vehicle-to-vehicle distance is short.
• When the preceding vehicle is traveling at the same speed or faster than your vehicle
• When the preceding vehicle is traveling at an extremely low speed
• Immediately after the vehicle speed has been set
• When the accelerator pedal is depressed
Curve speed reduction function
When a curve is detected, the vehicle speed will begin being reduced. When the curve ends, the vehicle speed reduction will end.
5
Driving