266 5-4. Using the driving support systems
● When the wheels are misaligned
●When driving on slick road surfaces, such as when it is covered with ice, snow, gravel, etc.
●When the course of the vehicle differs from the shape of a curve
●When the vehicle speed is excessively high when entering a curve
●When entering / exiting a parking lot, garage, car elevator, etc.
●When driving in a parking lot
●When driving through an area where there are obstructions which may contact your vehicle, such as tall grass, tree branches,
a curtain, etc.
●When driving in strong wind
■ Situations in which the lane may not be detected
●When the lane is extremely wide or narrow
●Immediately after changing lanes or passing through an intersection
●When driving in a temporary lane or lane regulated by construction
● When there are structures, patterns, shadows which are similar to lane lines in the surrounding
●When there are multiple white lines for a lane line
●When the lane lines are not clear or driving on a wet road surface
●When a lane line is on a curb
●When driving on a bright, reflective road surface, such as concrete
■ Situations in which some or all of the functions of the system cannot operate
●When a malfunction is detected in this system or a related system, such as the brakes, steering, etc.
●When the VSC, TRAC, or other safety related system is operating
●When the VSC, TRAC, or other safety related system is off
■ Changes in brake operation sound and pedal response
●When the brakes have been operated, brake operation sounds may be heard and the brake pedal response may change, but this does not indicate a malfunction.
●When the system is operating, the brake pedal may feel stiffer than
expected or sink. In either situation the brake pedal can be depressed further. Further
depress the brake pedal as necessary.
■ Situations in which the driver monitor may not operate properly
In situations such as the following,
the driver monitor camera may not be able to detect the driver’ s face, and the function may not operate properly.
●When the inside of the vehicle is
hot, such as after the vehicle has been parked in the sun
●When a very bright light, such as the sun or the headlights of following vehicle, shines onto the driver
monitor camera
●When the brightness inside the
vehicle changes frequently due to the shadows of surrounding structures, etc.
●When a very bright light, such as the sun or the headlights of an
oncoming vehicle, is shining onto the driver’ s face
●When light, either inside or outside of the vehicle, is being reflected from the lenses of eyeglasses or sunglasses
●When there are multiple faces in the detection range of the driver monitor camera, such as when a
front or rear passenger is leaning toward the driver’ s seat