4-4. Adjusting the steering wheel and mirrors
197 driving.
●If washer fluid remains on the camera lens surface after cleaning, the image may be difficult to see at night due to the height or inclination of the headlights of the vehicle behind. In this case, change to optical mirror mode.
●Some dirts may not be removed completely after cleaning. In this
case, rinse the camera lens with a large quantity of water and then wipe it clean with a soft cloth
dampened with water.
●Washer fluid is sprayed onto the camera lens surface. Therefore, the ice, snow, etc. adhering around the camera cannot be
removed.
NOTICE
■ To prevent the Digital inner mirror from malfunctioning
●Do not use detergents, such as thinner, benzene, and alcohol to clean the mirror. They may discolor, deteriorate or damage the mirror surface.
●Do not smoke, use matches, use cigarette lighters or allow open flames near the mirror. It
may damage the mirror or cause a fire.
●Do not remove, disassemble or modify the mirror.
■ To prevent the camera from malfunctioning
● Observe the following precautions, otherwise the Digital inner mirror may not operate properly.
• Do not strike or hit the camera or subject it to a strong impact, as the camera installation position and angle may be changed.
• Do not remove, disassemble or modify the camera.
• When washing the camera, rinse it with a large quantity of water and then wipe it clean with a soft cloth dampened with water. Do not strongly rub the camera lens, as it may be scratched and will not be able to transmit a
clear image.
• Do not allow organic solvent, car wax, window cleaner or glass coat to adhere to the camera cover. If this happens, wipe it off as soon as possible.
• Do not apply hot water to the camera in cold weather, as the
sudden change of temperature may cause the camera to not operate properly.
• When using a high pressure
washer to wash the vehicle, do not directly spray the camera and its surrounding area, as
doing so may cause the camera to not operate properly.
●Do not subject the camera to a strong impact as this could
cause a malfunction. If this happens, have the vehicle inspected by your SUBARU
dealer as soon as possible.
●Do not block the vent holes of the mirror. Otherwise, the mirror may be hot, leading to a malfunction or a fire.
4
Before driving