196 4-4. Adjusting the steering wheel and mirrors
■ To prevent the light sensors from malfunctioning
To prevent the light sensors from malfunctioning, do not touch or cover them.
■ To prevent causes of fire If the driver continues using the Digital inner mirror while smoke or odor comes from the mirror, it may result in fire. Stop using the system immediately and contact your SUBARU dealer.
Cleaning the Digital inner mirror
WARNING
Observe the following precautions. Failure to do so may result in death or serious injury.
■ While driving
●Do not adjust the position of the Digital inner mirror or adjust the display settings while driving. Stop the vehicle and operate the Digital inner mirror control switches. Failure to do so may cause a steering wheel operation error, resulting in an unexpected accident.
●Always pay attention to the vehicle’ s surroundings.
The size of the vehicles and other objects may look different when in digital mirror mode and optical mirror mode.
When backing up, make sure to directly check the safety of the area around your vehicle, especially behind the vehicle. Additionally, if a vehicle approaches from the rear in the dark, such as at night, the surrounding area may appear dim.
■ Cleaning the mirror surface
If the mirror surface is dirty, the image on the display may be difficult to see. Clean the mirror surface gently using a soft dry cloth.
■ Cleaning the camera
If it is difficult to see the Digital inner mirror image because water, snow, mud, etc. is stuck to the camera lens, operate the Digital inner mirror camera washer or change to optical mirror mode.( �P. 253)
■ The camera
The camera for the Digital inner mirror is located as shown.
■ Cleaning the camera with washer fluid
●When cleaning the camera, it may
be difficult to see the image due to the washer fluid. Therefore, take care in the surrounding area while