ZEMCH 2019 International Conference Proceedings April.2020 | Page 67

4.5 Maintenance  For the G‐SEED maintenance category, we believe that health‐friendly buildings can be achieved  by preventing discoloration and contamination of materials through duct protection, filter replacement,  and moisture absorption management during construction.  4.6 Natural Environment  In this category, we believe it is necessary to distinguish between the standards for assessment of  the  natural  environment,  such  as  green  land  formation,  natural  ground  green  rate,  and  biotop  formation  without  modifying  the  standards  for  improving  health.  The  use  of  health‐friendly  technologies can simultaneously preserve the natural environment and help humans to increase their  psychological sense of well‐being that results from contact with nature.  4.7 Indoor Environment  Table 1 compares the G‐SEED standards to the WELL building standards as they relate to human  health  systems.  The  analysis  focuses  on  non‐residential  projects.  For  standard  7.1  ‐  Application  of  Indoor Air Pollutants Low Emission Products, it seems to consider the transition from the method for  evaluating the use of certified materials to the assessment of whether the level of indoor air pollutants  exceeds  acceptable  levels.  Additional  standards  and  measures  such  as  high‐efficiency  air  filtration  systems and real time monitoring systems for PM10 and PM2.5 should be considered to protect the  health  of  building  users  from  particulate  matter.  For  noise  reduction,  exterior  noise  intrusion  from  vehicle  traffic  or  internally  generated  noise  from  mechanical  equipment,  on‐site  performance  tests  should be employed. Exterior sound pressure levels can be measured in decibels (DB)and noise criteria  (NC) for sound pressure limits of the octave band spectra ranging from 63 Hz to 8,000 Hz could be used  for mechanical equipment.  5. Results and discussion  It looks that G‐SEED is encouragement system to provide opportunities for physical activity or  spaces that enhance human health. It is likely that high level of G‐SEED has a more holistic knowledge  of  the  impact  of  buildings  on  the  health  of  their  occupants.  Implementing  and  maintaining  healthy  techniques seems to require the introduction of a policy system that can effectively maintain and utilize  the health building technologies applied to the building in the operational stage.  Table 1. Comparison of G‐SEED and WELL Standards Related to Health (Non‐residential Project)  G‐SEED Standard  1.4 Measures to prevent right of light  Alignment with WELL  Feature 61: Right to light  Health  Cardiovascular, Digestive Endocrine,  Immune, etc.    Cardiovascular, Muscular, Nervous,  1.6 Proximity of public transportation  Feature 67: Exterior active design 1.7 Bicycle parking lot installation  Feature 69: Active transportation  Cardiovascular, Nervous  2.2 TAB and commissioning  Feature 14: Air infiltration    Immune, Respiratory  3.1 Usage of Environmentally declared  Products  3.4 Use of hazardous materials  7.1 Application of indoor air pollutants  low emission products  7.2 Natural ventilation performance  Feature 97: Material transparency Feature 11: Material safety  Feature 25: Toxic material safety  Feature 02: VOC reduction  Feature 19: Operable window  Respiratory, Skeletal  Digestive, Endocrine, Immune,  Integumentary, Cardiovascular, etc.  Cardiovascular, Nervous, Respiratory,  Endocrine, Reproductive  Endocrine, Immune, etc. Integumentary,  Nervous, etc.  Cardiovascular, Respiratory  A Study of Health Performance Improvements for the G-SEED Rating System 56