APPLICATION TECHNICAL MANUAL OF
XINHAI MINING MACHINERY PRODUCTS
Disc Zinc Powder Feeder
Principle
The structure and working principle of the disc zinc powder feeder is basically as the same as that of the common disc
feeder, and is mainly composed of 3 parts including zinc powder hopper, disc and transmission device.
Features
Because of the less amount of the zinc powder, the disk diameter is generally 140~170mm and the rotating speed is
about 1r/min. It has the feature that the zinc powder feeding amount can be adjusted according to the capacity and
the gold grade of the solution. The equipment is driven by the motor through the V belt and the secondary worm gear
reducer, drives the disc on the central shaft to rotate. The powder materials fed into the hopper fall down to the disc by
the gravity, and are discharged from the outlet by the scraper as the disc rotates.
Application
It is applicable to the zinc powder replacement process to fill the zinc powder evenly and continuously into the mixer
filled with pregnant solution. In addition, it is also widely used for continuous and even feeding of powder materials in
the industries such as mineral processing, chemical, pharmaceutical and food.
Technical Parameter
Disc Diameter
(mm)
Disc Type
Rotating Speed of Disc
(r.p.m)
φ140 140 1.13
φ170 170 18.5
Feed Size
(mm)
Feed Amount
(kg/h)
1.5~2.4
0~2
1.5~3.6
Motor Model Motor Power
(kw)
Y801-4 0.55
团
集
海
Weight (kg)
65
76
Power-Driven Zinc Powder Mixer
Technical Parameters
鑫
Model Diameter of Hopper (mm) Motor Model Motor Power (kw) Weight (kg)
DXH － 510 510 A06324 0.25 180
Air Lifter
Technical Parameters
Model
KT60
Spec. of Suction Pipe (mm)
Spec. of Air Pipe (mm) Scope of Application
φ50X2.5 20 SJ2.0×2.5，SJ2.5×2.5，SJ2.5×3.15，SJ3×3.15，SJ3×3.5，
SJ3.15×3.55，SJ3.55×4，SJ4×4.5
φ110×5 Φ48×4
KT80
KT100
SJ7×7.5
SJ4×4.5，SJ4.5×5，SJ5×5.6，SJ5.5×6，SJ7.5×8，SJ8×8.5，
SJ8.5×9.0
Note: The length of carbon suction pipe and air pipe varies by the specification of leaching tank.
- 88 -