MAGNETIC SEPARATING
Permanent Magnetic Drum Magnetic Separator
Application
CTBY permanent cylindrical magnetic separator for precon-
centration: Suitable for wet preconcentration of magnetite
before entering grinding mills after fine crushing, and the
selected particle size should be less than 10mm.
CTBC permanent cylindrical magnetic separator for roughing:
Suitable for roughing of magnetite after stage one grinding
or multi-stage grinding or the roughing when recycling the
magnetite from the tailings after sorting of nonferrous met-
als. The selected particle size should be less than 4mm.
CTBJ permanent cylindrical magnetic separator for concen-
tration: Suitable for further concentration of coarse magne-
tite concentrate after grinding and classification and roughing. The selected particle size should be less than 2mm.
CTBN permanent cylindrical magnetic separator for thickening: Suitable for thickening and magnetic separation of
magnetite before sending back to grinding mills after grinding, classification and sand returning, or the thickening and
magnetic separation of magnetite concentrate before entering the filter press. The selected particle size should be less
than 4mm.
Technical Advantages
团
集
海
All are new type and high-efficiency wet magnetic separators
Magnetic systems all adopt Nd-Fe-B magnets with high magnetic energy product and high coercivity, strong magnetic
density and high affect depth. The demagnetization rate of the magnetic density within 8 years is no more than 5%.
With gradual change and smooth transition large angle magnetic system, by increasing the length of sorting belt and
magnetic turn to realize the efficient separation of magnetic and non-magnetic (or weak magnetic) minerals.
Covering the magnetic system with non-magnetic stainless steel to ensure no peeling off of the magnet
According to the different uses and flotation conditions, different series of magnetic separators adopt different mag-
netic systems and groove structures.
The groove structures are all semi counter-flow, and can be made into down flow type according to the beneficiation
conditions and the requirements of the customers.
The cylinder adopts non-magnetic stainless steel, and is covered with the super wear-resistant rubber produced by our
company, thus the service life can be prolonged significantly.
With strong adaptability to production, it can bear great fluctuation of feeding quantity of slurry and the fluctuation of
feeding particle size and slurry concentration.
Excellent beneficiation index with high grade and high rate of recovery can be achieved at the same time.
Magnetic separators of different series can be used together or singly to get excellent beneficiation target.
Reasonable design, reliable running and convenient maintenance.
鑫
Technical Parameters of CTBY Permanent Cylindrical Magnetic Separator for Preconcentration
Spec. & Model CTBY1018 CTBY1024 CTBY1030 CTBY1218 CTBY1224 CTBY1230
Diameter of Cylinder (mm) 1000 1000 1000 1200 1200 1200
Length of Cylinder (mm) 1800 2400 3000 1800 2400 3000
Surface Magnetic Density (mt) 350~550 350~550 350~550 350~550 350~550 350~550
Rotating Speed of Cylinder (r/min) 23 23 23 20 20 20
Capacity of Dry Ore (t/h) 42~65 53~86 82~124 58~97 71~120 103~158
Feed Size (mm) 0~10 0~10 0~10 0~10 0~10 0~10
20~50
Pulp Density (%) 20~50 20~50 20~50 20~50 20~50 Motor Power (kw) 5.5 7.5 7.5 7.5 11 11
Total Weight (t) 5.2 6.4 7.1 6.7 7.2 8.9
Equipment Length (mm) 3160 3790 4460 3380 4190 4770
Equipment Width (mm) 2250 2250 2250 2460 2460 2460
Equipment Height (mm) 1750 1750 1750 2000 2000 2000
- 63 -