APPLICATION TECHNICAL MANUAL OF
XINHAI MINING MACHINERY PRODUCTS
6-S Table
Principle
This table is mainly composed of eight parts including bed
head, motor, slope modulator, bed surface, bunker, water
tank, rifle bar and lubricating system.
The vertical reciprocating motion of the bed surface is
driven by the crank-connecting rod mechanism. The mo-
tor through the belt drive makes the pulley drive the
rotation of the bent axle with up-and-down motion of the
rocker. When the down motion of the rocker, the bracket
drives rear axle and reciprocating lever move backward,
by which the spring is compressed. The bed surface is con-
nected with reciprocating lever through linkage base, so at
this time it moves backward, and the rocker is pushed by
the tension force of the spring when it does the upward
motion with the forward motion of the bed surface.
团
集
海
Application
6-S table is one of the main equipment of gravity concentration, and it is widely used in the mineral classifications of
tungsten, tin, tantalum, niobium, gold and other rare metals and precious metals. It is also used for different operations
such as roughing, selection, and scavenging; different particle-size classifications of coarse sand (2-0.5 mm), fine sand
(0.5-0.074 mm), slurry (-0.074) and so on; classifications of iron, manganese ore and coal. The effective recycling par-
ticle size range of table is 2-0.22 mm when processing the minerals such as tungsten and tin.
Technical Parameters
Model
Bed Surface Type
Beneficiation Area Of
Bed Surface (m 2 )
鑫
Length(mm)
Bed Surface
Dimension
Width Of Driving
End(mm)
Width Of
Concentration
End(mm)
Max. Feed Size (mm)
6-S 7.6
6-S 4.08
6-S 0.5
Fine Sand
Bed Surface Slurry Bed
Surface 7.6 7.6 7.6 4.08 1.95 0.5
4500 4500 4500 3000 2100 1100
1850 1850 1850 1320 1050 500
1550 1550 1550 1100 850 430
2 0.5 0.074 Ore Sand -2
Slurry -0.1 Ore Sand-2
Slurry
-0.074 Ore Sand -2
Slurry -0.074
0.4~1.5 0.3~0.8 0.05~0.2
3 Kinds Of Bed Surfaces Selectable
Capacity (t/h) 1~1.8 0.5~1 0.3~0.5 Feed Density (%) 20~30 18~25 15~20 Stroke (mm) 16~22 11~16 8~16 6~30 12~28 9~17
Jig Frequency (r/min) 220 250 280 210~320 250~450 280~460
0.3~1.5 0.2~1 0.1~0.5
Water Consumption (t/h) 0.7~1 0.4~0.7 0.4~0.7
Notch Groove Section Shape Rectangle Sawtooth Wave Triangle
Motor Power (kw) 1.1 1.1 1.1
- 56 -
6-S 1.95
Coarse Sand
Bed Surface
10~30
Rectangle, Sawtooth Wave and Triangle Selectable
1.1
1.1
0.55