XINHAI CATÁLOGO catalogue | Page 27
GRINDING
Cone Grid Ball Mill
Principle
The main component is a cylinder with smaller diameter and longer.
Driven by the transmission device, the cylinder rotates slowly with the
materials fed from the cylinder inlet and crushed by the falling impacts
and autogenous grinding of the steel balls and ores in the cylinder. Due to
the continuously feeding materials, the pressure pushes materials to the
outlet and the grinded materials are discharged from the cylinder outlet.
Qualified materials flow from the cylinder outlet. In wet grinding, the
materials are taken out by the water flow; in dry grinding, the materials
are taken out by air. It is generally used in fine grinding operation.
Features
Large double row self-aligning roller bearing with low
friction force, easiness of start and significant energy
conservation is used to replace sliding bearing;
Cone design is adopted for the discharge outlet, which
can not only increase the volume, but also realize the
classification of the materials and balls at the cone end.
Technical Parameters
Motor
Model Motor
Power
(kw) Motor
Rotating
Speed
(r.p.m) Length
(mm) 900/300 41 Y160L-6 11 970 3271 1815 1400 0.65 1 4363
1350/300 41 Y180L-6 15 970 3786 1815 1400 0.83 1.35 4944
Cylinder
Diameter(mm) GZMG0912 φ900/φ675 GZMG0916 φ900/φ675 GZMG0918 φ900/φ675 1500/300 41
GZMG0921 φ900/φ675 1800/300 41
GZMG1216 φ1200/φ900
φ1200/φ900
GZMG1224 φ1200/φ900
GZMG1226 φ1200/φ900
GZMG1228 φ1200/φ900
GZMG1520 φ1500/φ1200
团
集
海
Cylinder
Rotating
Speed
(r.p.m)
Cylinder
Length
(mm)
Model GZMG1220
The closer to the discharge outlet, the smaller is the ball
diameter, which increases repeated grinding;
Grooved ring plate liner is used to increase the contact
surface of ball and ore, strengthen the grinding, lift the
ores, and reduce the energy consumption;
Overall frame is used, which is convenient for civil
engineering construction and equipment installation.
Effective Max.Ball
Width Height
Weight
Volume
Load
(mm) (mm)
(kg)
(m 3 )
(t)
Y180L-6 15 970 3936 1815 1400 0.91 1.5 5200
Y200L1-6 18.5 970 4301 1815 1400 0.97 1.67 5448
1200/400 36.4 Y200L26 22 970 3912 2076 1620 1.67 2.87 6610
1600/400 36.75 Y225M-6 30 980 4443 2076 1620 2.14 3.68 7400
鑫
2000/400 36.75 Y250M-6 37 980 5088 2138 1670 2.61 4.49 9410
2200/400 36.75 Y250M-6 37 980 5288 2138 1670 2.84 4.88 9757
2400/400 36.75 Y280S-6 45 980 5558 2168 1670 3.07 5.28 10270
1500/500 30.9 Y280M-8 45 740 4825 2785 2120 2.84 4.88 13011
14033
GZMG1523 φ1500/φ1200 1800/500 30.9 YR280S-8 55 723 5335 2785 2120 3.29 5.66 GZMG1526 φ1500/φ1200 2100/500 30.9 YR280S-8 55 725 5640 2750 2110 3.74 6.43 14814
GZMG1529 φ1500/φ1200 2400/500 30.9 JR117-8 80 725 6173 2785 2120 4.19 7.2 17209
GZMG1535 φ1500/φ1200 3000/500 30.9 JR117-8 80 725 6773 2785 2120 5.08 8.74 18710
GZMG1545 φ1500/φ1200 4000/500 30.9 JR126-8 110 725 8708 2875 2190 6.6 11 22578
GZMG1831 φ1800/φ1390 2510/600 25.4 JR137-8 210 735 7756.87 3683 2785 6.5 11.5 30947
GZMG1835 φ1800/φ1390 2910/600 25.4 JR137-8 210 735 8156.87 3683 2785 7.35 13 31349
GZMG2131 φ2100/φ1670 2500/600 24.05 JR128-8 155 725 7579 3750 2825 9 16.5 34920
GZMG2136 φ2100/φ1670 3000/600 24.05 JR136-8 180 735 8180 4264 3183 10.46 19.2 41640
GZMG2130 φ2100/1670 2400/600 24.05 JR136-8 180 735 7580 4214 3183 8.75 16 38732.1
GZMG2141 φ2100/φ1670 3500/600 24.05 JR137-8 210 735 8913 4350 3183 11.92 21.5 44626
GZMG2145 φ2100/φ1670 3750/750 23.3 JR138-8 245 735 9556 4274 3230 12.5 22.6 48871
GZMG2430 φ2400/φ1670 2300/700 22 JR137-6 280 960 9023 4836 3383 11.5 4122 59516
GZMG2727 φ2700/φ2100 2285/550 21.62 JR138-8 245 735 8041 5051.4 3650 12.9 25.8 60844
GZMG2733 φ2700/φ2287 2750/550 21.6 JR138-8 245 735 8433 4897 4385 15.9 28 69302
GZMG2736 φ2700/φ2287 3050/550 21.6 JR157-8 320 750 8735 4897 4385 17.5 33.2 72365
GZMG2740 φ2700/φ2287 3450/550 20.76 JR158-8 380 750 9565 5150 3620 19.7 38.2 76852
GZMG2742 φ2700/φ2287 3650/550 20.76 JR158-8 380 750 9765 5150 3640 20 41 78979
- 19 -