APPLICATION TECHNICAL MANUAL OF
XINHAI MINING MACHINERY PRODUCTS
■ TRANSPORTATION
TD75 Fixed Belt Conveyer
Principle
Belt conveyor is mainly composed of two end rollers and the closed belt
which tightly set on it. The one drives the conveyor belt is named as the
driving roller; the other one only used for changing the motion direction
of the conveyor belt is named as the bend roller. The driving roller is driv-
ing by the motor through the reducer while the conveyor belt is dragged
by the friction between the driving roller and the conveyor belt. The driv-
ing roller is generally installed on the discharging side which increases the
traction and convenient to drug. Materials are fed by the feeding end,
dropped on the conveyor belt, and discharged by the discharging end
which is drove driven by the conveyor belt friction.
团
集
海
Features
TD75 fixed belt conveyer is a general series product of belt conveyor.
Application
Wildly used in the fields of chemical, coal, metallurgy, mine, power, light industry, food, transportation, etc. Applied to
convey bulk materials with loose density of 0.5~2.5t/ ㎡ and unit goods.
Technical Features
鑫
The unit weight of materials conveyed by the TD75 belt conveyor should be less than 2.5t/m 3 ;
This series is divided into six specifications including 500mm, 650mm, 800mm, 1000mm, 1200mm, and 1400mm by the
bandwidth;
Divided into 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw, 18.5kw, 22kw, 30kw, 40kw, etc. by the driving power;
Divided into 0.8m/s, 1.0 m/s, 1.25 m/s, 1.6 m/s, 2.0 m/s, 2.5 m/s, 3.15 m/s, 4 m/s, etc., by the belt speed;
Refer to the following table for the max. conveying capacity of this series.
Technical Parameters
Belt Width B (mm)
Carrying Idler Type
Belt Speed (m/s)
500
650
800
1000
1200 1400
Conveying Capacity Q (t/h)
Trough Idler
0.8 78 131 —— —— —— ——
1.00 97 104 278 435 655 891
1.25 122 206 318 544 819 1115
1.6 156 264 445 696 1048 1427
2.0 191 323 546 853 1284 1748
2.5 232 391
3.15
4.0
551 1033 1556 2118
824 1233 1858 2528
2202 2995
The conveying capacity in the table is calculated under the condition of γ=1t/m 3 for the material density, 0-7ºfor the conveyor inclination angle,
and 30º for the material accumulation angle.
- 134 -