FEEDING
Chute Feeder
Principle
This equipment is generally installed at the bottom of the outlet of ore
bin. The ore falls on the bushing at the bottom of the tank, which is
installed on the roller wheel, and connected with the double-shaft re-
ducer through eccentric gear, and then joined with the motor through
the coupling. In the operation, the motor through coupling drives re-
ducer, and the equipment and the drain cap between feed rack bottom
and roller wheel through eccentric disc will do reciprocating rectilinear
motions, so as to complete uniform feeding.
Features
Chute feeder can be set up on the ground, and also can be hoisted on
the outlet of ore bin. The motion of chute bottom slab is reciprocat-
ing, and the stroke can be adjusted by the eccentric wheel drive of
transmission, the eccentric distance of which is half of the stroke. According to some production practices in mineral
processing plant, the eccentric distance should be not less than 30 mm for sticky ores. The width of the chute feeder is
about 2-2.5 times the maximum particle size.
团
集
海
Application
It is suitable for short distance transportation of the block materials with feed particle size of 160 mm or less. It is wide-
ly used for feeding the materials in ore bin uniformly and continuously to crushing or transportation machine in mine,
mineral processing plant, chemical industry, cement and building materials departments.
Technical Parameters
Model Outlet Dimensions
W×H (mm) Max. Feed Particle Size
(mm) Feed Capacity
(t/h) Motor Model Motor Power
(kw) Weight
(kg)
CG300×300 300×300 50 10~~20 Y90L- 4 1. 5 265
CG400×400 400×400 100 10~~30 YCT160-4A 2. 2 300
Y112M- 4 4 Y160M- 6 7. 5
鑫
CG600×500 600×500 200 10~~50
CG700×500 700×500 200 10~~60
CG1240×980 1240×980 350 36~~90
1045
1100
1710
- 125 -