NONMETAL PROCESSING
Delivery Processor
Features
It can be used for lifting, desliming, concentration, and decomposition;
The equipment is produced with American technology;
External labyrinth bottom end spindle head;
Vane and tank can be lined with the world-famous super wear-resistant Xinhai rubber.
Technical Parameters
Model Feed Size
(mm)
φ540×4600 30
φ1070×4600 30
φ1600×7630 75
φ1800×6000 70
SX750 30
Slope
(° )
12
Rotating Speed of
Screw Shaft (r.p.m)
Capacity (t/h)
23
23
16 23.36
7.5
20~25
22
10
Motor Power
(kw)
7
Weight
(kg)
3900
40~50 40 18000
70 55 14200
10~20 11 4530
团
集
海
Desliming Bucket
Principle
It is a kind of simple equipment used for classification, desliming and concentration. Its
outline is an inverted cone. The feed cylinder is set in the center of the liquid level, the
bottom edge of which is below the liquid level. The pulp is fed into the center cylinder
along the tangent direction, and is discharged from the bottom edge after buffering.
The pulp discharged flows out radially around the overflow weir. In this process, the
coarse particles that the settling velocity of which is greater than the flow rising com-
ponent velocity will sink in the tank, and are discharged through the setting sand at
the bottom. The fine particles with 2 mm or less in feed size and 75 μm or less in grad-
ing size will flow into the overflow tank along with the slurry on the surface.
It is mainly used for raw ore desliming before the hydraulic classifier so as to improve
the efficiency of classification; and for the concentration and dewatering of ores set
before ore grinding equipment in order to improve the feeding concentration of grind-
ing equipment; also for controlling feeding concentration and capacity before all kinds of slurry separation equipment.
鑫
Features
Convenient adjustment and good desliming effect;
Tank can be lined with the world-famous super wear-resistant Xinhai rubber.
Technical Parameters
Model TND1500 TND2000 TND2500 TND3000 Subsidence Area (m 2 ) 2 3 4.9 7
TND5000
20
Volume (m 3 ) 0.76 1.8 3.5 6.1 33.5
Grading Size (mm) ＜ 0.07 ＜ 0.07 ＜ 0.07 ＜ 0.07 ＜ 0.07
Feed Size (mm) <0.2 <0.2 <0.2 <0.2 <0.2
Discharge Concentration (%) 40~60 40~60 40~60 40~60 40~60
Desliming Efficiency (%) 33~45 33~45 33~45 33~45 33~45
- 109 -