Worship Musician Magazine November 2026 | Page 72

AUDIO
GAIN STAGING // THE MOST IMPORTANT KNOB YOU’ RE PROBABLY USING WRONG | Steve Sattler
There’ s a familiar moment during soundcheck. Somebody says,“ My vocal sounds distorted.” The engineer pulls the fader down.“ Better?”“ It’ s quieter, but it’ s still distorted.” So, we start looking at EQ. Maybe the compressor is doing something strange. Maybe it’ s the microphone. Maybe the PA is having a bad morning. But sometimes the problem happened before the signal ever reached the fader. That’ s gain staging. Gain staging isn’ t particularly glamorous. Nobody buys a new console because it has an exciting gain knob. But getting signal levels right throughout the entire audio path is one of the most important— and most misunderstood— parts of good live sound. Before you EQ it, compress it, or blame the PA, make sure the signal arriving at the console is healthy.
GAIN IS NOT VOLUME Let’ s start with a distinction that causes a surprising amount of confusion: the gain control and the channel fader do different jobs. The preamp gain determines how much amplification is applied to the signal entering the console. The channel fader determines the level of that channel as it is sent onward into the mix. Think of the gain control as establishing a healthy operating level for the channel. The fader is what you use to mix that channel relative to everything else. That distinction matters because if the input stage is overloaded, pulling the fader down doesn’ t repair it. Suppose your worship leader sings loudly into the microphone and the input preamp clips. You can pull the fader down 10 dB and the channel will certainly get quieter— but now you have a quieter distorted signal. The distortion has already occurred upstream. The same thing can happen before the console. A wireless transmitter input can overload. A receiver output can be set too hot for the next stage. An active DI can clip. A keyboard output can distort. A playback interface can clip before its signal ever reaches the mixer. That’ s why gain staging is really about the whole signal path, not just the gain knob on the console.
START AT THE SOURCE A good rule is to work in the same direction the signal travels. Start at the source. For a vocal microphone, that means the singer and microphone. For an acoustic guitar, it might be the pickup and onboard preamp. For a keyboard, it’ s the instrument’ s output stage. For
72 November 2026 Subscribe for Free...