Wood floors ny Hardwood Flooring Brooklyn | Page 8

Below are simple step-by-step instructions to follow:
1) Make sure that all furniture are cleared out and that the underlay
boards are clean and dust free. The most important thing is using
spacer blocks; these are used to ensure there is a gap around the edge
of the walls, to allow for movement of the flooring.
2) Pick a corner of the room to start off and put a space block at the top
and the edge of the skirting where your first panel is going to be,
ensuring that the groove side of the panel faces the wall.
3) Work in rows going down the room, so with the next panel, connect
the tongue and groove together at the end, making sure to place a
space block against the wall. You may need to use a knocking block
and a rubber mallet to knock the panels together to ensure a tight fit.
Continue along the row like this.
Wood Floor NYC