Separator ™ Inserts
Feed Values for Grooving
Separator • X 2 and X 2 -Ultra
0,30
X 2
0,25
This insert has the same geometry as the WMT-SX ™ . Chip
control geometry offers the widest range of speed and feed
capabilities and provides excellent fl atness and fi nish. This
chipbreaker cuts with the least amount of tool pressure,
extending tool life. The geometry also includes wipers and
a corner radius. This geometry works well on a variety of
materials.
0,20
0,15
0,10
This insert has the same geometry as the WMT-SX-Ultra. The
X 2 -Ultra is an enhanced version of the X 2 and is ideal for stainless
steels, nickel-based alloys, tool steel, INCONEL ® , and titanium.
0,05
2,0
2,5
3,0
width of cut [mm]
X 2 -Ultra
1
Separator • S 2 and S 2 -Ultra
Recommended Starting Feed
0,30
S 2
High positive rake with a more open chipbreaker enables
increased speeds and feeds for moderate- to high-speed
applications. The geometry includes wipers and a corner
radius that provides superior fl atness and fi nish. This insert
is also available with sharp corners. Its greatest strengths
can be seen on stainless steels and soft gummy steels.
feed
0,25
0,20
0,15
0,10
The S 2 -Ultra is an enhanced version of the S 2 and is ideal
for 300 series stainless steels, nickel-based alloys, tool steel,
INCONEL, and titanium at moderate to high speeds and feeds.
0,05
2,5
3,0
4,0
width of cut [mm]
1
S 2 -Ultra
Separator • Classic and F 2
Recommended Starting Feed
0,30
Classic
0,25
A good general-purpose insert for carbon steels, alloy steels,
and most stainless steels. The Separator Classic chipbreaker
is designed to perform well at moderate to slow speeds and
feeds. The Classic provides standard high lead angles and sharp
corners, making it the fi rst choice when choosing an insert for
nib-free cut-off.
0,20
0,15
This insert provides superior fl atness and fi nish on a wide variety
of materials Ideal for thick wall parts or cutting off larger diameter
parts to centre. The Separator F 2 performs well at slow to
moderate speeds and feeds.
F 2
E112
0,05
1,5
2,5
3,2
4,0
4,8
width of cut [mm]
1
Recommended Starting Feed
widia.com
0,10