VariMill I ™ Series
• Increase your output with less tool changes and increased Metal Removal Rates( MRR).
• No specifi c tools for roughing and fi nishing required.
• Less passes due to 1 x D slotting capability( not recommended for 4717 and 4727).
4777 Series 4778 AlTiN Series
• High metal removal rates and tool life in:
— Stainless steels, steels, and alloyed steels.
— High-temperature alloys and titanium.
• Titanium geometry design.
• Corner radii.
4717 Series 4727 TiAlN Series
• Stainless steel and steel geometry design.
• 3,5 x D length-of-cut.
• Less passes necessary for long wall machining.
• Stainless steel and steel geometry design.
• 5 – 6 x D length-of-cut.
• Less passes necessary for long wall machining.
47N7 TiAlN Series
• Stainless steel and steel geometry design.
• Radii corner and neck design for cutting depths requiring additional passes.
47N7 AlTiN Series
• Titanium and stainless steel geometry design.
• Radii corner and neck design for cutting depths requiring additional passes.
47N6 Series
• Stainless steel and steel geometry design.
• Benefit from long reach and neck design for deep cavities.
47N0 Series
• Stainless steel and steel geometry design.
• Centre cutting ball nose.
widia. com O3
KL-TECH s. r. o. | www. klte. cz