High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7N02 7N12 7N22 • Vision Plus ™ Micro
Series 7N02 7N12 7N22 • Vision Plus Micro
A
Material
Group
P
K
H
Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AlTiN
B
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 0,3 0,4 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
0 1,25 x D 0,25 x D 0,75 x D 150 – 200 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
1 1,25 x D 0,25 x D 0,75 x D 150 – 200 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
2 1,25 x D 0,25 x D 0,75 x D 140 – 190 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
3 1,25 x D 0,25 x D 0,75 x D 120 – 160 fz 0,002 0,002 0,003 0,003 0,004 0,006 0,008 0,011 0,014 0,017
4 1,25 x D 0,25 x D 0,5 x D 90 – 150 fz 0,002 0,002 0,003 0,003 0,004 0,005 0,008 0,010 0,013 0,016
5 1,25 x D 0,25 x D 0,5 x D 60 – 100 fz 0,001 0,002 0,002 0,003 0,004 0,005 0,007 0,009 0,012 0,014
1 1,25 x D 0,25 x D 0,75 x D 120 – 150 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
2 1,25 x D 0,25 x D 0,5 x D 110 – 140 fz 0,002 0,002 0,003 0,003 0,004 0,006 0,008 0,011 0,014 0,017
1 1,25 x D 0,25 x D 0,5 x D 80 – 140 fz 0,002 0,002 0,003 0,003 0,004 0,005 0,008 0,010 0,013 0,016
2 1,25 x D 0,25 x D 0,3 x D 70 – 120 fz 0,001 0,002 0,002 0,002 0,003 0,004 0,006 0,008 0,010 0,012
3 1,25 x D 0,25 x D 0,25 x D 60 – 90 fz 0,001 0,001 0,002 0,002 0,002 0,003 0,005 0,006 0,008 0,009
widia.com
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For tools with reach > 3 x D, reduce fz by 20%.
For tools with reach > 5 x D, reduce fz by 30%.
O167
Side Milling (A)
and Slotting (B)