High-Performance Solid Carbide End Mills
Grades and Grade Descriptions
Coatings provide high-speed
capability and are engineered
for roughing to fi nishing.
P
M
K
N
S
H
Steel
Stainless Steel
Cast Iron
Non-Ferrous
High-Temp Alloys
Hardened Materials
wear
resistance
Coating
toughness
05 10 15 20 25 30 35 40 45
Grade Description
P
M
Coated carbide grade with PVD multilayer coating. This grade is designed for
dry milling most types of material, apart from the hardened variety. This grade is
characterised by excellent toughness and wear resistance. It provides outstanding
protection against cratering and abrasion.
K
S
P
M
Universal carbide grade with TiAlN PVD coating. This grade is a high-performance
grade for fi nishing operations and is characterised by high hardness and
wear resistance.
K
S
AlTiN PVD coated ultra-fi ne carbide grade. The combination between hard substrate
and wear-resistant coating provides outstanding performance in high-feed milling of
hardened materials (58–65 HRC).
H
Coated fi ne-grain grade with AlTiN PVD coating. This grade is a thin, hard PVD
coating particularly suitable for cutting steel, cast iron, stainless steel (wet), and
titanium (wet) with high metal removal rates. This grade can be used for materials
with hardness up to 52 HRC.
P
High-quality submicron carbide grade for high-performance machining of non-ferrous
alloys. Excellent toughness ensures a controlled wear rate and the submicron structure
enables extremely sharp cutting edges.
M
K
S
N
M
Coated carbide grade with PVD multilayer coating. K30F-DCF is designed for
dry milling most types of material, apart from the hardened variety. This grade is
characterised by excellent hardness and wear resistance. It provides outstanding
protection against cratering and abrasion.
K
P
widia.com
M
General purpose coated carbide grade with TiCN PVD coating for use at intermediate
cutting speeds. For universal use due to its high wear resistance and hardness. Only
use wet or with MQL (Minimum Quantity Lubrication).
K
N
N17
P