High-Performance Solid Carbide End Mills • Aluminium Application Data • Series 5102 • AluSurf ™
� �Series 5102 • AluSurf
Material Group
N
For Side Milling( A) and Slotting( B) uncoated
Recommended feed per tooth( fz = mm / th) for side milling( A). For slotting( B), reduce fz by 20 %.
Cutting Speed— vc A
B D1— Diameter m / min ap ae ap min max mm 1,5 2,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
1 |
1,5 x D |
0,5 x D |
1 x D |
500 |
– |
2000 |
fz |
0,014 |
0,018 |
0,036 |
0,054 |
0,072 |
0,090 |
0,108 |
0,144 |
0,180 |
2 |
1,5 x D |
0,5 x D |
1 x D |
500 |
– |
1500 |
fz |
0,012 |
0,016 |
0,032 |
0,049 |
0,065 |
0,081 |
0,097 |
0,130 |
0,162 |
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters > 12mm.
� �Series 5103 • AluSurf
Application Data • Series 5103 • AluSurf ™
Material Group
N
For Side Milling( A) and Slotting( B) uncoated
Recommended feed per tooth( fz = mm / th) for side milling( A). For slotting( B), reduce fz by 20 %.
Cutting Speed— vc A
B D1— Diameter m / min ap ae ap min max mm 3,0 6,0 8,0 10,0 12,0 16,0 20,0
1 |
1,5 x D |
0,5 x D |
1 x D |
500 |
– |
2000 |
fz |
0,027 |
0,054 |
0,072 |
0,090 |
0,108 |
0,144 |
0,180 |
2 |
1,5 x D |
0,5 x D |
1 x D |
500 |
– |
1500 |
fz |
0,024 |
0,049 |
0,065 |
0,081 |
0,097 |
0,130 |
0,162 |
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters > 12mm.
High-Performance Solid Carbide End Mills
Application Data • Series 51N3 • AluSurf ™
� �Series 51N3 • AluSurf
Material Group
N
widia. com
For Side Milling( A) and Slotting( B) uncoated
Recommended feed per tooth( fz = mm / th) for side milling( A). For slotting( B), reduce fz by 20 %.
Cutting Speed— vc A
B D1— Diameter m / min ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0
1 |
1 x D |
0,5 x D |
1 x D |
500 |
– |
2000 |
fz |
0,060 |
0,080 |
0,100 |
0,120 |
0,160 |
0,200 |
2 |
1 x D |
0,5 x D |
1 x D |
500 |
– |
1500 |
fz |
0,054 |
0,072 |
0,090 |
0,108 |
0,144 |
0,180 |
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5. For better surface finish, reduce feed per tooth. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters > 12mm.
O129
KL-TECH s. r. o. | www. klte. cz