Widia - monolitní frézy | KL-TECH s.r.o. | www.klte.cz widia-frézování | Page 149

AluSurf ™ Series
• Increase your output due to less tool changes and increased Metal Removal Rates (MRR).
• No specifi c tools for roughing and fi nishing necessary.
• Less passes due to 1 x D slotting capability.
• Perfect for MQL (Minimum Quantity Lubrication) methods.
5102 Series 5103 Series
• 2-fl ute, 45° helix.
• Radii and sharp corner
confi guration. • 3-fl ute, 38° helix.
• Unequal fl ute spacing.
• Radii and sharp corner
confi guration.
51N3 Series
• 3-fl ute, 38° helix.
• Unequal fl ute spacing.
• Extended neck for long-reach
applications.
• Radii and sharp corner
confi guration.
Operation Slotting
Customer: Aluminium Block
Material: 6061 Aluminium
Workpiece: AluSurf solid carbide end mill.
Results: 100% better surface fi nish on walls and fl oor.
AluSurf Delivered 100% Better Surface Finish!
1.2
1
tool: uncoated tools uncoated tools
end mill: 16mm 3-fl ute 16mm 3-fl ute
material: aluminium aluminium
depth of cut (ap): 8mm 8mm
width of cut (ae): 8mm 8mm
speed (Vc): 610 m/min 610 m/min
RPM (N): 12,000 RPM 12,000 RPM
feed rate (Vf): 3,600 mm/min 3,600 mm/min
chip load per tooth (Fz): 0,1 mm/th 0,1 mm/th
metal removal rate: 230 cm 3 /min 230 cm 3 /min
widia.com
0.8
0.6
0.4
0.2
0
WIDIA-Hanita ™
AluSurf ™
Best Competitor
O125
WIDIA-Hanita ™
COMPETITOR