2
Section
ASSEMBLY
2.1 BEGINNING ASSEMBLY
The WeedRoller PRO comes in three separate boxes. Inspect each box to make sure that no parts are missing.
Box One contains: Drive Head Assembly, Owner's Manual, Warranty Registration Card, Installation DVD.
Box Two contains: (2) 7' Roller Tubes
Box Three contains: (1) Flex Coupler Assembly, (1) 7' Roller Tube, (1) Roller Adapter Assembly, Dock Mount Brackets
(2), 70' Extension Cord, Assorted Hardware, AC Power Supply.
2.2 CONNECTING THE ROLLER ADAPTER
FIRST ROLLER
TUBE
1. Align the holes in the roller adapter with the bolt holes
in a 7' roller tube.
2. Install the 3/8" x 1" flanged bolts and nuts provided in
the hardware kit.
3/8" X 1" SERR.
FLANGE BOLT
3. Torque to 30 ft-lbs.
3/8" SERR.
FLANGE NUT
ROLLER ADAPTER
ASSEMBLY
2.3 CONNECTING THE ROLLERS
1. To connect one aluminum roller to another, align the
bolt ends of the two rollers.
SECOND ROLLER
TUBE
2. Install the 3/8" x 1" flanged bolts and nuts.
3. Torque to 30 ft-lbs.
FIRST ROLLER
TUBE
NOTE
Additional rollers can be added. Maximum number of
rollers varies with conditions. WeedRoller PRO warranty is only valid up to a roller length of 35ft. Added
tubes may require a special permit for use. Please
consult your state and local regulations.
4
WeedRoller PRO Owner's/Parts Manual
3/8" SERR.
FLANGE NUT
3/8" X 1" SERR.
FLANGE BOLT
54678-00 R010114