Mark
T
32 / Sport and Trail Magazine
he exciting sports of Trail Challenges and Mountain Trail are based on real-life situations found working on the ranch or on the trail. Certain obstacles simulate these working conditions, and can be used to effectively train for these sports.
Mastering Balance Beam
By Mark Bolender
off, then repeat the process. You should apply gentle pressure to the horse until it moves forward and puts its foot back on the balance beam. Immediately stop all movement to take the pressure off, and let the horse “think it through.” This method will appear slow at first, but will pay dividends in the end because it builds more boldness and confidence than the method of pushing the horse and forcing it to comply with your request.
As the horse steps up with both feet, make sure your lead rope is loose. This is crucial because if the horse doesn’t stand on the balance beam on a loose lead rope then, in its mind, the effort never happened. So you must resist hanging onto the lead rope. Depending on the horse, placing both feet on the beam and then removing them is normal, and this may go on a number of times. But once the horse has both feet on the beam and appears quiet, it’s time to apply pressure and ask it to step up with its hind feet. Once again, when the horse steps up with all four feet, stop all pressure. Allow it to stand on a loose lead rope before moving on. At this point you will be facing the horse.
Remember that in the horse’s mind, the less you move your feet, the more authority you have. Stay quiet, calm, and show no emotions. The horse will reward you by taking several baby steps. It may take a day of two before the horse walks completely over the balance beam in a relaxed manner while “hunting the trail.” When the horse has mastered the low balance beam from the ground, then you can move to the elevated balance beam. The steps are the same - drive the horse to the obstacle and allow it time to think it through.
When the horse is comfortable with walking across the elevated beam then it’s time to ride. Some horses act as if they’ve never seen the low balance beam once you’re mounted up. However, the steps are the same as presenting the balance beam from the ground. Have the horse face it straight on and allow it time to think it through. The horse will probably put one foot up at first, and then back off. Allow this to occur, but be persistent in asking the horse to go forward. Once it steps up on the balance beam, allow it the privilege of smelling, chewing or pawing the beam.
Most horses will simply step off at this time. Do not turn the hose around. Instead, back up the horse and have it step up on the beam again. Show no emotion or impatience, and do not become aggressive; that will defeat the propose of building boldness and confidence in the horse. Once the horse is willing to step up quietly and walk on the beam, simply look forward and walk. At this point your job is done, and the horse should walk quietly and confidently, with a focused expression on both the low and elevated balance beam.
Happy Trails and Bolender Blessings!
BUILDING CONFIDENT TRAIL HORSES
ONE OBSTACLE AT A TIME
the trail. Certain obstacles simulate these working conditions, and can be used to effectively train for these sports.
One important training obstacle is the balance beam. It simulates some of the difficult log and bridge crossings required to cross creeks or ravines. And it’s a fantastic tool to teach horses to focus, not only on the crossing but on any task at hand. The following is a good method to begin training with a balance beam.
First, wrap your horse’s legs to prevent injuries. It’s also ideal to have two balance beams to work with; one that’s low to the ground and another that’s more elevated. You should master the low balance beam before you graduate to the elevated one. Also, before starting the training, you must have the horse’s respect. If you don’t, the horse will try to push into your personal space, (or your “Bolender Bubble.”) If this happens, you must correct the behavior before proceeding.
Once you’ve determined your space is respected, drive the horse from the ground to the low balance beam and have it inspect the obstacle. Do not force the horse, but give it all the time it needs to inspect, smell, chew or even paw the beam if it desires. Being curious creatures, most horses will place one foot on the balance beam and then take it off, then repeat the process. You should apply gentle pressure to the horse until it moves forward and puts its foot back on the balance beam. Immediately stop all movement to take the pressure off, and let the horse “think it through.” This method will appear slow at first, but will pay dividends in the end because it builds more boldness and confidence than the method of pushing the horse and forcing it to comply with your request.
As the horse steps up with both feet, make sure your lead rope is loose. This is crucial because if the horse doesn’t stand on the balance beam on a loose lead rope then, in its mind, the effort never happened. So you must resist hanging onto the lead rope. Depending on the horse, placing both feet on the beam and then removing them is normal, and this may go on a number of times. But once the horse has both feet on the beam and appears quiet, it’s time to apply pressure and ask it to step up with its hind feet. Once again, when the horse steps up with all four feet, stop all pressure. Allow it to stand on a loose lead rope before moving on. At this point you will be facing the horse.
Learn more online:
www.imtca.org
the