Thank Your for your Support this past Year
Step 5: Remove the 6
retainer bolts holding
the planetary case
onto the bearing housing and remove the
case from the bearing
housing. There are 6
little springs under the
engagement lever, be
sure not to damage or
loose them!
Step 6: Remove the
plastic bushings /
bearings from the
bearing housing and
inspect them. One of
mine was partially
crushed, so they got
replaced. For about
$4 each from Summit
Racing it was a cheap
fix.
Step 7: Inspect everything. Make sure that
no gears are chipped or worn. Clean all of
the old grease out. Ramsey recommends a
Lithium based grease for their winches. Everything looked good with the gears and
engagement lever mechanism on this one.
After finishing cleaning and painting all of
the parts, a copious amount of grease was
smeared all over everything, and then the
planetary was reassembled.
Step 8: After getting the bearing
housings and drum back together,
the unit was delivered to the electric
motor shop so ] HܚY