Vendor Door Catalogs Turnglass Poly-Classic Columns | Page 3

FRP
Turncraft Exclusives Products
TIMESAVER CAP AND BASE
New to the Turncraft product line, our 8” Square TimeSaver Cap and Base employs the same
QuickFit installation pressure tabs as our round 8”, 10”, and 12” TimeSaver products.
Our TimeSaver cap and base offers the easiest and quickest installation in the industry.
• Patent pending pressure tabs
• Made out of fiber-reinforced recycled
ABS (acrylonitrile butadiene styrene)
• Designed for use on round FRP
columns in 8”, 10”, and 12” sizes
• Made with 95% recycled material
• Extremely strong and durable
• Self aligning with no fasteners
• Excellent paint adhesion
• Fast installation
TIMESAVER R AILING ADAPTER BR ACKET
Our TimeSaver railing
adapter bracket solves the
age old problem of attaching
a railing system to the
decorative base of a round
column. Simply use one of
these new brackets to make
an attractive attachment to
our 8”, 10”, and 12” round
Tuscan bases. Brackets are
available in two different
heights, allowing them to
be used with just about any
railing system on the market.
Patent pending
pressure tabs
NEW! COPPER OR ALUMINUM FLASHING
Turncraft is now offering real flashing for our
most popular sizes of columns - the 8", 10", and
12" round and square Poly-Classic® FRP columns
with Tuscan caps. Flashing is available in either
copper or aluminum. Flashing is 3/4" larger than
abacus size, to be folded over the edges of the cap,
held in place with
Crimp edges of flashing over sides of cap.
construction
Secure in place with construction adhesive.
adhesive (not
supplied). Flashing
for other sizes and
styles of caps are
available. Call for
more information.
Installation Kits Available
INSTALL KIT
For structural FRP columns,
the install kit consists of 4
ABS brackets (2 for top of
column and 2 for bottom) and
fasteners required for standard
installation. We recommend
2 kits for columns 16" and up: this will allow the
installer to use 4 brackets at the top and bottom of
the column. When installed, the cap and base will
conceal these brackets and hardware.
SPLIT KIT
Each kit contains six nylon
locking straps with 1/8”
spacers and one quart
(1.85 lb.) automotive body
filler. For columns over 12
foot in height, two kits will
be required per column. Turncraft recommends
using an abrasive (Carborundum or similar) or
carbide blade to trim the shaft. Split columns are
not load bearing.
12 | 800
| 800 423 3311 • www.turncraft.com
423 3311