Vendor Door Catalogs Endura Z-Series Sill Brochure | Page 4

Z-Series Options
Z-Series Modularity
Series 50
Inactive Panel Caps
The modular design of the Z-Series Sill allows the
pre-hanger to switch out the inswing cap and replace it
with a bumper outswing cap. And, with one continuous
sill, you can reposition the active and sidelite caps to
create a wide variety of door unit configurations. This
allows you to hold your inventory count down.
For Mull/Patio Systems, the Z-Series features a line of
patented repositionable panel caps
Cut to length for any combination of opening widths
Adjustable inswing widths: 4-9/16", 4-7/8", 5-5/8",
5-13/16", 7-13/16"
Bumper outswing widths: 4-9/16", 5-5/8", 5-13/16",
7-13/16"
Notched Sill
Any door system up to 12' can be built
using modular Z-Series Sills. Start with
the Z-Series Deck.
E
L
P
M
A
S
Add an inswing cap
4
For an outswing sill
2
3
For an inswing sill
Add an outswing cap
5
6
Add a sidelite cap
For a continuous sidelite
Continuous Sidelites
By providing a continuous seal across the door unit, you
receive a better fit that prevents leaks. Patented inactive
sidelite seats are repositionable for mull or patio system
convenience.
Series 90
1-13/16" 1-13/16"
Notched Sill
Notched &
1/4” Horned Sill
Notched &
2” Horned Sill
Entire profile of the jamb extends to the ground level
E
L
P
M
A
S
No requirement for a jamb haunch
Notched sills allow for the use of the same jamb
inventory for both inswing and outswing applications,
after the jamb is cut down.
1
2
Notched and Horned Sill
Horn fills the offset between the jamb edge and the
brickmould
Both the jamb and brickmould extend to the ground
level
No requirement for a jamb tennon
Notched Sill
Notched & Horned Sill
Available in 5-5/8" and 5-13/16"
Machining Options
We provide both notched and horned sills that are
compound cuts to match a straight cut jamb
Sill Extenders *
5° Sill Extenders allow multiple sill widths from the
same base sill
ZAI4565FN With XNN Extender
5 - 5/16"
4 - 9/16"
Series 60
1 2
3 4 Series 90
Series 70
6
Series 70
4-9/16" Sill Extenders
· Continuous aluminum dam
· Mull haunched to properly fit the sill base
Designed specifically for the Z-plus sill, the fixed
convertible cap allows easy replacement of the fixed
cap portion of the sill with Endura’s adjustable cap while
leaving the sill nosing in place. No need to replace the
entire sill.
1-13/16"
1-3/8"
Accommodates jamb stop in an outswing application
1
Fixed Convertible Cap
Series 60
ZAI4565FN With XMN Extender
5 - 3/4"
4 - 9/16" ZAI4565FN With XWN Extender
6 - 9/16"
4 - 9/16"
ZAI5625FN With XMS Extender
6 - 9/16"
5 - 5/8" ZAI5625FN With XM Extender
6 - 13/16"
5 - 5/8"
ZAI5625FN With XWS Extender
7 - 5/8"
5 - 5/8" ZAI5625FN With XXW Extender
5-5/8” Sill Extenders
ZAI5625FN With XN Extender
6 - 3/8"
5 - 5/8"
ZAI5625FN With XW Extender
7 - 5/8"
5 - 5/8"
*Sill extender also available for 5-13/16”
5 - 5/8"
8 - 5/8"
7