20 LS853 Pre-Installation Blockout
Ingrade
Why Use LS6052-K Pre-Installation Blockout? Why Use LS6052-K-SP Pre-Installation Blockout?
The LS6052-K acts as a blockout, and is intended for installation
before the luminaire however it has other special functions. To
simplify the installation, every LS6052-K is supplied complete with a
4-way, ¾" PVC junction box, inside which the installer can make all
necessary connections, and allows the completion of all wiring even
before the luminaire arrives on site. This method also ensures the
luminaire itself is not damaged during concreting or other site works.
Note: The junction box remains serviceable after installation.
To complete the installation, Lumascape provides an IP68 connector,
enabling a tool-free final connection from the luminaire to the branch
circuit. In addition, this connector is readily detachable, allowing for
off-site maintenance. The LS6052-K-SP pre-installation kit (order separately) is ideal for use
in applications where maximum flexibility for the type and location of
branch circuit connections are required or where exact site conditions
may be unknown. For use with the LS6052-K-SP, Lumascape provides
the LS853 complete with 6.5' of factory-installed hookup wire and a ½”
NPT adapter or an S00W cord (both options include a MicroAntiLeach™
seal). This provides the installer with greater flexibility to determine the
type and location of the branch circuit connection. This option is also
100% hard-wired, and does not feature the IP68 detachable couplings
for off-site maintenance. All aspects of the luminaire itself are still
field serviceable.
Connection Type '85' for LS6052-K Pre-Installation Blockout
Lens Options
6.
76
OptiClear™ Glass
Glass of very high
optical purity and load
strength. Suitable for
walk-over and drive-over
applications.
Ø10.33” (262 mm)
IP68 Connector & Junction Box
The luminaire is fitted with an IP68 connector, which attaches directly to the cord supplied
with LS6052-K, without the use of any tools. The cable is 1.8' (0.56 m) in length, and is factory
assembled with a 4-way, ¾" junction box - Remains field serviceable after installation.
Connection Type '84' for LS6052-K-SP
Pre-Installation Blockout
Connection Type '82' for LS6052-K-SP
Pre-Installation Blockout
GripGlass™
OptiClear™ glass with
slip reduction glazing
process. Suitable for
walk-over and drive-over
applications.
Borosilicate Glass
Ideal for limited
access locations. Not
recommended for high
traffic pedestrian areas.
Cover Options for
Pre-Installation Blockout
Flush covers for pre-installation use special
seals and support bushes to ensure static
loads up to 8 140 lb (3 700 kg) are properly
supported. In order to achieve this drive-
over rating, OptiClear™ or GripGlass™
must be used.
6.5' SOOW Cord ½" NPT Adapter For connection to the branch circuit
via junction box (by others) or other
approved method. The luminaire is factory-fitted with 6.5'
hookup wire. Ensure terminations can be
made within this length. Pre-Installation Blockout
Round Flush Cover
c/w 6.5' SOOW Cord (16/3) For other length options, consult factory. SS316: Polished
SS316: Brushed