UN Industri 2019 Ledlenser INDUSTRI 2019, ENG | Page 7

11
10
LEDLENSER
LIGHT FUNCTIONS
BOOST STROBE
A temporary burst of light. Quick flashes of light with an irritating blinding
effect for emergency situations.
IP PROTECTION CLASSES
IP PROTECTION TYPE ACCORDING TO EN 60529
POWER BLINK
A bright light for any situation. Automatically emits light pulses at
regular intervals.
MID POWER
Sufficient light output for extended
battery life.
LOW POWER S.O.S.
Economical light for long battery life,
glare-free reading and working. The light emits an SOS distress signal in Morse
code (3 x short, 3 x long, 3 x short).
PULSE
The light intensity keeps rising and decreasing evenly.
1st digit: Solid particle protection
2nd digit: Protection against liquids
1ST DIGIT:
SOLID PARTICLE PROTECTION 2ND DIGIT:
PROTECTION AGAINST LIQUIDS
0 No protection against particles 0 No protection against water ingress
1 Protection against ingress of solid particles
with diameters of >50mm 1 Protection against vertically dripping water
2 Protection against ingress of solid particles
with diameters of >12,5mm 2 Protection against angled dripping water (15° tilt)
3 Protection against ingress of solid particles
with diameters of >2,5mm 3 Protection against spraying water (up to 60° angle)
4 Protection against ingress of solid particles
with diameters of >1mm 4 Protection against splashing water
(from all directions)
5 Protection against harmful dust deposits inside 5 Protection against water jets (from all directions)
6 Protection against ingress of dust (dust-tight) 6 Protection against powerful water jets
7 Protection against water ingress with brief
immersion
8 Protection in case of indefinite immersion
POSITION
Regular light pulses at long intervals for
position marking.
IP56
To achieve the protection rating, the light must be fully closed and the focus system, if featured, should not be moved.