Special High Quality, Leak Tight
Welding Hose for Argon Feed
Advancing forward in weld purging technology, Huntingdon
Fusion Techniques HFT® now manufacture tailor made
Argon Gas Feed Hose assemblies with leak tight fittings.
Luke Keane, Distributor Support for HFT® said:
“It is important when welding stainless steels,
titanium, zirconium and other reactive metals,
that the welding zone is purged of oxygen, even
down to as low as 20 parts per million (ppm).
These special, high quality Argon Hoses, provide
welders with a guaranteed leak tight method of
feeding non-contaminated argon gas into their
welding zone.”
The natural rubber feed hose comes complete with an
argon regulator, which directly connects to any range
of Inflatable Tube and Pipe Weld Purging Systems at
one end and to the gas source at the other.
These hose assemblies can also be used for
transporting other gases where a guaranteed leak
tight delivery is required.
A selection of leak tight adaptors is provided for
attaching the argon gas regulator whilst the pre-
fitted other end joins up with all HFT® Argweld®
Weld Purging Systems. All of these high quality
fittings will eliminate welding connection difficulties
that welders might experience on site.
The Argon Gas Feed Hoses can also be supplied to
all other TIG / GTAW welders with their own special
fitting as required. The hoses are available off the
shelf in a standard range of lengths, 30 m, 25 m, 20
m, 15 m, 10 m and 5 m.
Conforming to British Standard
BS EWN 599 Quality Standard,
the Argon Gas Feed Hoses each
have a temperature range from
-30º up to 80ºC and a safety
factor of three times working
pressure 20 bar (300 psi).
HFT® advises welders to only
use top quality hose assemblies
to feed argon gas for top quality
welds!
.
www.huntingdonfusion.com
4
TUBE NEWS August 2018