TCT
TUNGSTEN
CARBIDE
TIPPED
BEARING GUIDED
BISCUIT JOINTER SET
Biscuit dimensions shown below. All sizes
shown are nominal.
Profiles showing cross section of biscuit joints.
8.5mm
For biscuit jointing of timber, man-made fibre
and particle board with the router. The set
includes three sizes of bearing which set the
correct depth of cut for the three sizes of
biscuit available.
A slightly longer cut than the length of the
biscuit is required, to allow some lateral play
for easy alignment during assembly.
A water based glue (PVA) is used with
the biscuits which will expand
as the moisture is absorbed.
Boards are simply clamped
together until glue is cured.
For larger boards, biscuits can
be doubled up by making two passes.
Using bearing B23 No. 0
47.5mm x 15.5mm x 4mm
Suitable for 8 -12mm board
Using bearing B19 No. 10
53mm x 19mm x 4mm
Suitable for 13 - 18mm board
Using bearing B15 No. 20
60mm x 23mm x 4mm
Suitable for 19mm + board
4mm
SLOTTING & GROOVING
10.5mm
4mm
12.5mm
WOODEN
BISCUITS
See page 196 for a variety
of sizes available.
includes
three
bearings
4mm
Instructions
supplied
B
C
For certified biscuits
see our website.
B2
B3
D
D
mm C
mm B
mm B2
mm B3
mm Product
Ref.
40.0 4.0 15.0 19.0 23.0 342
1/4”
Shank Diameter
8mm
1/2”
£65.36 £65.36 £65.36
BEARING GUIDED
MATCHLINING SET
A complete cutter set for producing
matchlining. Jointing parts are interchanged
nged
on the arbor to change the mode of the
cutter. A 6.0mm tongue is obtained.
Includes two bearings and two groovers. .
Timber thickness
Min. 15.0mm
Max. 19.0mm
Matchlining
groove set-up
Matchlining
tongue set-up
C
A
45°
C2
B
338
D
D2
Instructions
supplied
B2
18,000
All prices are exclusive of VAT
A
Deg. D
mm D2
mm C
mm C2
mm B
mm B2
mm
45° 47.0 - 11.0 6.0 34.0 22.0
Product Shank Dia.
Ref.
1/2”
338
£127.26
For stationary machines at max. recommended speeds as indicated.
tool technology
55