CONTRACTOR
HINGE JIG
Contractor hinge jig with adjustable apertures to recess
hinges in wooden doors and frames. Constructed from
aluminium extrusion, it is easy to use with minimal
setting-up time, completing the job both accurately and
quickly. Single piece and two piece available.
O
O
O
O
O
O
O
O
O
O
Use on-site and in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick and simple to set-up as the hinge is used as the pattern.
Clean and accurate recesses are achieved every time.
Suitable for timber based doors and square butt hinges.
Use with a light duty router with 1/4” collet.
Long reach router cutter required, 12mm diameter with 70mm overall length.
Angled position slots to prevent edge guide creep.
Jig thickness allows it to be used on frames with a maximum 25mm thick fixed
stop fitted.
HOW IT WORKS:
HINGE/JIG (single piece) £263.10
H/JIG/A (two piece) £267.35
Setting the length using hinge
as a pattern.
TECHNICAL DIAGRAM:
Setting the width
HINGE/JIG
H/JIG/A
Setting the depth
DOOR HINGE POSITIONS
FEATURES:
• With adjustable apertures.
• Fully adjustable bottom hinge recess.
• Can be used on max. 25mm thick
fixed stops.
• Also suitable for fire doors.
Routing hinge recesses
COMPATIBILITY
www.trend-uk.com/compatibility
INCLUDES: SPECIFICATION:
4 x Apertures
2 x Bradawls with spacer
1 x 16mm guide bush
1 x T-handle hex key
1 x 4mm spacing gauge
1 x Plastic storage tube with HINGE/JIG
1 x Fabric storage case with H/JIG/A Hinge sizes possible
Length min.
2-5⁄8” (67mm)
Length max.
5” (127mm)
Width min.
3⁄8” (9.5mm)
Width max.
1-3⁄8” (35mm)
REPLACEMENT PARTS:
Door sizes possible
Height min.
6’ 5” (1955mm)
Height max.
6’ 10” (2100mm)*
Thickness min.
5⁄8” (16mm)
Thickness max.
2” (51mm)
* Please note for doors over 2040mm the
1.
2.
3.
4.
5.
6.
7.
8.
Special guide bush (dia. 16mm x 10mm)
Bradawl (requires spacer)
Nylon spacer for bradawl ( 1 off)
4mm feeler gauge ( 1 off)
Aperture block ( 1 off)
T-handle hex key ( 1 off)
Plastic storage tube (for HINGE/JIG)
Fabric carry case (for H/JIG/A)
Product Ref. Price
GB160
£11.92
WP-HJ/09
£5.47
WP-HJ/08
£1.84
WP-HJ/10
£3.17
WP-HJ/02
£7.28
WP-AKT/01 £6.36
CASE/HJ
£19.46
CASE/HJ/A £22.23
Fitting the door
bottom hinge will be higher than 9“ up.
ROUTING TIP
P
6.
1.
2.
4
5.
8.
7.
172
3..
All prices are exclusive of VAT
tool technology
RADIUSED HINGES
For 10mm radius hinge solutions, use Trade
router cutter Ref. TR20DX1/4TC & guide bush
Ref. GB240.
Router & cutter not included.