ROUTABOUT HOLE CUTTER JIG
COMPATIBILITY
www.trend-uk.com/compatibility
Special TCT router cutter
Unique cutter
utter design with built in depth guiding
bearing fitted to shank.
Setting-up
The diameter of the finished access hole will
be 250mm. Carefully mark the centre point
of the circle, if possible positioning the access
hatch between the floor joists. Screw the
Routabout jig to the floor using a single No.8
particle board screw at the centre point to act
as a pivot.
Access to pipes and cables beneath
chipboard floors in seconds. For builders,
plumbers and electricians.
A 250mm diameter opening can be cut and made good in
seconds.
O Designed for use in new or existing 18mm and 22mm chipboard
or similar floors.
O Cuts only the thickness of the board.
O No waste, the piece cut out is used to make good the floor.
O All you need is a plunge router (750 watts or above).
Cutters are offered with 1/4” or 1/2” shank sizes. An 8mm
shank cutter is available as an accessory.
O A Unibase may be required for certain makes and models
of router.
Please refer to UK Building Regulations Approved Document
B and any amendments before using this product.
O
Routing procedure
With the guide bush and cutter fitted to the
router, place onto the template. The depth
is automatically set by a top guide bearing
attached to the cutter body. Rotate the
router around the centre screw in a clockwise
direction, cutting to the full depth in a series of
shallow steps until the cutter breaks through.
REPLACEMENT PARTS:
1.
Completed cut
When cut, the waste piece is supported by
the wings of the jig. The stepped cutter
automatically cuts a rebated edge on the waste
piece as well as around the edge of the hole.
2.
Product Ref.
Price
Replacement rings for 18mm thick floors
Pack of 10
RBTRNG18/10
£46.68
RBTRNG18/100
£425.94
Pack of 100
RBTRNG18/250 £1,037.92
Pack of 250
For 22mm thick floors
Pack of 10
RBTRNG22/10
£55.17
Pack of 100
RBTRNG22/100
£512.09
Pack of 250
RBTRNG22/250 £1,246.97
Replacement cutters for 18mm thick floors
With 1/4” shank
RBT/CUT/1
RBT/CUT/2
With 1/2” shank
For 22mm thick floors
With 1/4” shank
RBT/CUT/3
With 1/2” shank
RBT/CUT/4
£45.92
£45.92
ROUTABOUT
KITS
For 18mm thick floors
RBT/1 £60.47
With 1/4” shank cutter
RBT/2 £60.47
With 1/2” shank cutter
For 22mm thick floors
RBT/3 £64.71
With 1/4” shank cutter
RBT/4 £64.71
With 1/2” shank cutter
INCLUDES:
1 x Routabout template
3 x Insert rings
1 x Special TCT router cutter
1 x 30mm Plastic guide bush
OPTIONAL ACCESSORIES:
5.
6.
Product Ref.
Universal sub-base
Certain makes and models of routers will require
a Unibase to accept the guide bushes. UNIBASE
Heavy duty 30mm guide bush
GB30
3.
2.
Replacement bearing WP-RBT/CUT/A £13.23
4. Replacement template RBT/PLATE £25.79
4.
End result
Fit the plastic insert ring into the access hole
and turn the waste piece over. Drop it into the
ring and it will lay flush with the floor surface.
156
All prices are exclusive of VAT
tool technology
Router not included.
£20.51
£9.14
1.
£49.38
£49.38
3.
Price
5.
6.
To download videos, test reviews, spare parts & instruction manuals
visit: www.trend-uk.com/downloads