How to Attach a Prusik to the Rope
Step 1
Wrap the prusik around both ropes a few
times and then clip the ends together with
a screwgate carabiner. More wraps will
create more friction around the ropes,
……..
though four wraps are generally enough.
Pull the knot tight, make sure it is neat and
the double fisherman's knot is away from
the ropes.
Step 2
Clip the prusik to your leg loop. The prusik
will slide down the ropes if you hold it close
to your leg loop and lock around the ropes
if you let go. Test this before you abseil.
If it doesn't lock, take it off and re-tie it with
an extra wrap around the ropes.
Harness
Leg Loop
If your prusik loop is too long, it's possible
that it could jam into your belay device
during the abseil. If this happens, it can be
difficult to control your descent. To avoid
this, you can extend your belay device with
a sling (see page 105).
VDiff – Trad Climbing Basics > Ropework
100