STEP 4:
Your potentiometers will likely have a
tiny metal tab on them that makes them
impossible to flatly mount. Snap them off
and mount the pots. Press the dust seals
onto the backs if you haven’t yet.
STEP 5:
Wire all the loose wires to their
destinations, including power, LED
positive lug, ground (the unsoldrered
sleeve lug from step 3), and the board
inputs and outputs.
STEP 6:
Wire the tip lugs of the input and output
jacks to the switch. One of them will lead
to the as-of-yet unsoldered footswitch lug
9, which you can now finally solder.
STEP 7:
That’s it! Sit back and savor the flavor!
26
DIY //
Build Your Own Tim Escobedo Uglyface