Step 4:
Insert the electrolytic
capacitors, bend leads and
clip. It may be a tight fit, those
220uF caps can be kind of big.
Step 5:
Insert the chip and
transistor. I didn’t use a socket
for the transistor.
BEFORE PERFORMING THE NEXT
STEP, PLEASE SEE STEP 1 OF THE
ENCLOSURE INSTRUCTIONS
Step 6: Cut wire for the edges
of the board, place them in
the board and solder. Attack
the potentiometer leads to the
appropriate lugs and solder
those in.
That’s it! Now onto the
enclosure!
ToneReport.com
47