Timber iQ February - March 2018 // Issue: 36 | Page 64
REGULARS - PRODUCTS
SEAMLESS SCREW DRIVERS
All handles have the unique anti roll Felo handle
with a supporting hole for additional leverage and
easy hanging.
Screw bit ends come in Pozidriv-Superdriv,
Phillips, Plus, Minus, Torx, Torx Tamper Resistant and
Torx Plus IP. All the Felo Electrical Ergonic units come
with a 15-year warranty.
The impact proof handle core is coated with
elastic, scratch resistant elastomer containing cells
of highly flexible plastics. A clever addition is the
hexagon bolster on the bottom of the handle which
allows one to use a spanner for more torque.
Felo Ergonic handles now apply to their electrical range of screw
drivers making them the first handle to adapt to the user’s hand
featuring a smooth, seamless handle for maximum comfort and
no strain.
For more information, contact
+27 (0) 11 314 7711.
A BLADE TO RECKON WITH
Julia Utensili in partnership with First Cut, have recently developed a new
blade called the ‘Iron Lady’.
The Iron Lady is an innovative circular saw blade combining the
toughness of steel with the performance of carbide. This results in even
higher standards of hardness, toughness, finish and durability – not to
mention best cost-per-cut
This extra fine-grained high-speed steel (HSS) blade has hardness values
above 900HV (Vickers hardness rating). The efficiency of the blade is
enhanced by a multi-layer physical vapour deposition (PVD) coating with a
surface hardness of more than 3650HV. The innovative production process
allows for very tight manufacturing tolerances, while the teeth have a
specific profile designed for high-performance cutting.
For more information, contact
+27 (0) 11 614 1112.
PRECISION CUTTER FOR NOVICE OR PRO
The Rip-Cut easily makes straight, accurate, repeatable
cuts without measuring, marking or keeping the saw on
the cut line and uses an edge guide to keep your saw
moving straight.
With a built-in measuring scale, you don’t have to
measure and mark each cut, either.
The Rip-Cut does this with a long edge guide that
follows the straight edge of the sheet you are cutting.
Simply lock the saw in at the measurement you want, up
to 610mm using the built-in measuring scale, and then
make your cut.
The Rip-Cut is easy and intuitive for a novice to use,
while also being extremely robust for professional use.
For more information, contact
+27 (0) 11 314 7711.
62 FEBRUARY / MARCH 2018 //