Timber iQ August - September 2020 // Issue: 50 August - September 2020 | Page 33

PRODUCTS Nailing it – lightweight and well-balanced The Cadex Pneumatic Nailer is part of a range of tools ideal for trim, mouldings, cabinetry, decorative work and all fine finishing and precision wood working. It has all of the latest features, it is super-lightweight (only 0.97 kgs) and is wellbalanced, with a fine precision nose for easy aiming. It has a rear exhaust which aids quieter operation. The swivel coupler plug allows for freedom of movement and lessens the load on the wrist. A no-mar soft plastic nose tip ensures that only a pristine finished surface is left with no dents, scratched or scuffs. There is a built-in belt hook for easy access. It shoots 23 ga. headless pins + 23 ga. brad nails to a range of 12 to 35mm, with a magazine of a 100 pieces and pressure of 70 to 100 psi. The Cadex Nail Gun also comes with a magazine sight window and a built-in air duster that allows you to blow away dust straight from the gun. This is the ideal pinner for invisible fastening in all hardwoods. For more information, contact: Vermont Sales Tel: [phone] Website: www.vermontsales.co.za Brokk BCP planer for controlled material removal Cuts and joints galore The Makita 18V DPJ180ZJ Cordless Plate Joiner provides up to 300 cuts, or 150 joints on a single use of a 3.0Ah battery. This model can also be connectable to a vacuum cleaner. There is an anti-restart function (with a warning lamp), which is a handleadditional safety feature. The motor delivers a no-load speed for 6,500 r/min for quick and precise cutting in a variety of woods. There are six depth settings with one-touch stops for 0, 10 and 20 (the most common biscuit sizes). The blade diameter is 100mm and the maximum cutting depth is 20mm. The rack and pinion vertical fence system is engineered for accurate fence adjustments, which can be locked in any position between 0 and 90 degrees with positive stops at 0,45 and 90 degrees. For more information, contact: Rutherford – Makita Jean-Pierre Du Plessis | Tel: [phone] Website: www.makita.co.za The three models in the BCP series are specially designed to work with Brokk remote-control demolition machines offering up to seven times the speed of hand-held options and providing precision and safety for grinding, brushing or removing concrete, glue, carpet, tile and other materials. Hood and vacuum connections are also available. The BCP Planer has a maximum cutting depth of 64 millimetres per pass and automatic levelling in all directions. The BCP Planer provides high-quality and even-removal across a wide area. Further is offers 360-degree rotation which allows contractors to work at any angle, including overhead, for maximum efficiency. A selection of cutting drums for different operations further increases versatility. And with drum replacement taking less than 5 minutes, contractors can quickly switch from removing concrete to removing plaster, glues, and so on. For more information, contact: Brokk distributor: Demolition and Drilling Equipment (DDE) Tel: [phone] | Email: [email protected] Do you have any new and exciting products to share with the industry? Email your short write-up and product image to [email protected] www.timberiq.co.za // AUGUST / SEPTEMBER 2020 31