Tim McAmis Performance Parts Catalog IV | Page 40

35

Oil Systems

24 Quart Oil Tank

This 24-quart oil tank fits neatly beside the 10-gallon fuel cell and includes all the fittings to connect to any blown alcohol engine. Internal plumbing allows the return of oil with no aeration and smooth flow out to the pump.

Includes a heating pad for pre-heating of oil. Tank dimensions- 6-1 / 4” wide, 13” high,

17” long.( excluding fittings & fill cap).

TMR-1188.......$ 1,095.00

DRy Sump Tank Mount Kit

This mount kit was designed to use on carbureted engines to mount the dry sump tank to the motor plate. Some fabrication and welding is required.

TMR-1194K.......$ 75.50

Oil Bypass Manifold

This oil bypass manifold is designed to bolt directly onto the popular Plueger dry sump pump used on almost every blown alcohol engine. It loops the oil back into the engine through the pressure side of the pump and

the oil is then run through the filter on its way back to the oil tank rather than before. This unit will also get rid of the oil filter restriction on the pressure side and increase oil going to the engine by about 20 psi.

AEL-1000.......$ 250.00

System 1 Filter Assembly

All TMRC blown alcohol cars use System One Filtration due to its unmatched filtering capability and ease of maintenance. Keeping a couple of spare bullets in your trailer will reduce the amount of time needed to service the engine between rounds.

SYS-209-512561.......$ 169.00

SyStem 1 Billet Chassis Mount

This billet mount bolts to the chassis and connects the filter to hoses with # 12 fittings.

SYS-221-90004-12.......$ 150.56

System 1 billet Chassis mount Tab

Constructed from 4130,. 125” thick.

VAN-87.......$ 8.80

Adhesive Oil Tank Heater

Self-Adhesive, Peel & Stick Flexible Rubber Heater. Grounded Oil Pan / Sump Heater 5” X 7”” 375 Watt 120 Volt With 60” Cord & 3 Prong Plug Assembly.

ARC-AOR-507GL.......$ 78.00

Vent Tank

These small aluminum tanks are designed for many applications but we use them to vent the dry sump tank. They can be mounted to the side of the dry sump tank or to the radiator mounts. Use VAN-82 to attach the tanks to the radiator mounts. Both tanks feature a petcock drain.

MOR-85470.......$ 100.51(. 357 Pipe Thread Inlet) MOR-85465.......$ 103.66( 12 AN Inlet)

Aluminum Tank Bracket

This tank bracket can bolt or weld to tanks such as the vent tanks above.

VAN-82.......$ 12.50

Heating Element

These heating elements perform well in oil or water and are available with a steel or aluminum weld bushing.

MOR-23980.......$ 95.56( Alum.) MOR-23990.......$ 95.56( Steel)

for the latest products, information and to shop online 24 / 7!