The shape of the neck is an individual choice . Many guitarists prefer to play high-speed parts on a flat neck , while blues players prefer thick and massive necks .
How is the neck attached to the guitar ?
The main types of neck fastening are :
Bolt-on neck
The most practical solution . The bolted mount will allow you to easily replace the neck in case of a malfunction , and it is also easiest to transport such instruments unassembled . Guitars with such necks are inexpensive and have a bright sound , but the bolt-on design worsens the sustain . In budget guitars , the bolted mount is a kind of Achilles heel - it is there that cracks and backlashes form in the first place .
Glued neck
The glued neck allows for better sustain and smoother sound , which is explained by the connection of the neck and guitar body at the molecular level using a special adhesive . Glued neck guitars are more expensive and harder to repair , but they are noticeably more durable .
Through mount
This mounting method improves the sound and increases the cost of the guitar . The neck is attached with glue through the entire body of the guitar , which provides , even more sustain compared to a glued neck . The reliability of the tool increases , but necks with a through fastening are practically unrepairable . Through-mounting is most commonly used on bass guitars and 7-9-string electric guitars .
What is the Headstock Angle ?
The headstock can have a certain angle of inclination to the neck . The tilt of the headstock ensures that the strings are pressed against the nut and , therefore , the guitar ’ s tuning is more stable . On a guitar without a headstock angle , special retainers are installed that provide the required string bend angle .
Guitar neck checklist before buying
1 . Hold the guitar in your hands . The neck should “ lay down in the hand ”, it should be comfortable for you .
2 . Pay attention to scratches or cracks - there should not be any . We recommend that you look at the heel of the neck and at the back of the neck around the first two frets because that is where cracks most often occur .
3 . The neck must be absolutely flat or have an acceptable deflection . Anything that is out of range is a malfunction . Such a malfunction can be eliminated by adjusting the truss rod , however , a strong neck deflection can be caused just by a broken truss rod . Replacing an anchor is not a cheap process . We also recommend checking the neck for the absence of a “ screw ” bend - in this case , the neck is almost impossible to repair .
The Score Magazine highonscore . com
41