The Score Magazine July 2019 issue | Page 46

Recording Carnatic Music There are many articles and Youtube videos showing how to record great rock and roll music, String sessions, great sounding vocals etc. I would like to now explain my own techniques for producing top notch clarity in capturing carnatic music live sessions. This is my all-time favourite since I am myself a professional Mridhangam player. First of all, we must have a comfortable space for the artiste to do a live recording session. The golden rule of Recording carnatic music is to record them live at the same time. Let me explain to you in detail. There would VOCALS: For carnatic vocals, use any dynamic mic like the SM 58 or a condenser microphone to get a good tonal character from the artiste. If two artistes are sitting in the same room, then use a dynamic mic for minimal microphone leakage. But here the leakage between the mics is the big beauty of tracking live session. In fact, I prefer the Violin and the Vocal in the same room so that the Singer gets the full support from the Violin artiste. VIOLIN: Recording a violin can be a challenge as it has lots of harmonic content from low to high frequency. But here any microphone like the Dynamic or a condenser will do. I point the microphone about 5 to 6 inches away from the body hole above the bridge place so that you get the correct tone of the acoustic violin presence. Do not worry about the bleed from your vocal microphone. That blending of both Vocal and Violin is the beauty of recording the carnatic music. If you want to use a condenser mic, place it little far and not too close to the body as you will get the bow squeaking noise in your recordings. MRIDANGAM: For many years, I was using the SM57 Dynamic microphone on the Right side were the black patch is located and then be four members in a session. For example let us consider the following. A vocalist, Violin player, Mridhangam (Percussion) player and then a Gatam artiste (Clay pot). Generally, it’s a good idea to make them sit with eye contact so that you can have that full coordination in your entire album. Some artistes prefer a click track and some don’t prefer it. Now provide them with good headphone mix and do a good balance so that they get comfortable and have a feel of a live concert. a SM 58 on the Bass side of the Mridhangam. You can also use condenser microphone on the right side (Black Patch side) but to position about one foot away as the artistes have different hand strokes while playing it. If is too close, then they might knock the mic! The best position is to keep slightly off axis so that it captures the tone very nicely. On the Bass side, try using a kick drum mic like the AKG D112 or the Sennheiser MD 421 Dynamic mic for great low end punch to your recordings. I use the MD 421. If you want to use the condenser also its fine. But try to place it little far as the hand stroke if different for each player. GATAM /KANJEERA/ MOORSING For recording the Gatam, I prefer a SM 57 to give that sharp Attack of the instrument and then later tweak it on my mixing. The SM57 works so perfect for this instrument for its tonal value. For the Kanjeera, try to place the mic behind the instrument as you will get more details low frequency sound than on the front. Some prefer to place the mic on the front. But remember, the hollow resonance is at the back! The Moorsing is usually played in the mouth like a mouth organ. Use any Dynamic microphone like the SM 58 or SM 57, this should give you an good great sounding tone in your tracking. Happy Tracking! Author: L. Baba Prasad. He is the owner and chief Sound/Mix and Mastering Engineer at Digi Sound Studio. He also teaches Sound Engineering and Music Production courses. For more details, visit www.digisoundacademy.com Picture credit: Mrudula, Digi Sound Studio 44 The Score Magazine highonscore.com