THE REALITIES ABOUT POULTRY The Modern Farm - The Realities About Poultry_Seco | Page 77

Mannual application Prepare a stock solution of 1-2% of Interalkaline cleaner and apply on brush or
spray the solution onto all hard surface using low pressure Lance Spray onto surfaces at a rate of
500-600ml/m2 depending on the grease or organic matter situation
Immersion Cleaning Interalkaline cleaner should be used at dilution rate 1:50-100 in immersion
cleaning. Parts to be cleaned are placed in the cleaning solution to come in contact with the entire
surface of the parts. Immersion cleaning is preferred for parts that must be placed in baskets and
soak for 30 minutes before thorough rinse in portable water. Performances can be improved by
moving the parts within the liquid.
Foaming Prepare a working solution at dilution rate of 1:20 and use foam Lance for foaming.
Warning
 Interalkaline Cleaner is classified as corrosive under EU regulation.
 Keep out of reach of children.
 Do not breathe mist/vapours/spray.
 Do not get in eyes and on skin.
 Wear protective clothing, gloves.
 Keep cool. Protect from sunlight.
Packaging
5L, 20L, 200L and 1000L packaging according to UN standard
Summary
To achieve effective disinfection you must:

Thoroughly clean and scrub objects before applying disinfectants. Disinfectants cannot work on
top of caked-on dirt and manure, so thoroughly wash surfaces before disinfecting.

Apply disinfectants using brushes, sponges and spray units. Allow adequate contact time (follow
manufacturer’s instructions.)
 Dispose of used disinfectant according to local regulations.
 Use only approved disinfectant.
 Prepare disinfectant solution in correct concentration as recommended by a manufacturer.
Page 76 of 163