SAFESEXTRA • 59
‘Installation and full
operating instructions
are available on Safelock
Systems’ website’
TIME DELAY
Time delay is a feature which requires
a period of time to elapse before the
lock can be opened. This prevents users
from being forced to open the lock
immediately. The maximum time delay
period is 99 minutes, and the maximum
open window is 19 minutes.
On the MiniTech system, users 50-59
can override time delay and open the lock
immediately, which is most often used for
cash-in-transit couriers.
CERTIFICATION
MiniTech swingbolt, motorbolt and
deadbolt locks are certified to EN1300
Class B standard, and are approved for use
on safes up to Grade 5 (V).
BOLT TYPE
MiniTech is available with several
different bolt types, allowing for a wide
range of retrofit options.
TIMELOCK EXEMPTION
Some users can be profiled as being
exempt from the timelock schedule.
Swingbolt
Motorbolt
The display shows the time delay and
opening window counting, and is set
as standard to count upwards, so that
observers do not know when the time is
due to run out, but can be configured on
request.
‘All features available
on MiniTech are
accessible by
pressing and holding
shortcut keys – such
as 1 for managing
users, or 9 for
amending time delay’
DALLAS KEYS
A Dallas key in addition to a code is
required to open the lock, for some or all
users. If in dual mode, some users can be
specified as Dallas key only, such as for
cash-in-transit couriers.
Deadbolt
Latchbolt
Motor Latchbolt
MENU
All features available on MiniTech
are accessible by pressing and holding
shortcut keys – such as 1 for managing
users, or 9 for amending time delay. The
display screen is easy to read and menu
operations are straightforward and quick,
allowing for efficient administration of the
lock system.
CONFIGURATION
MiniTech is programmed to work
out of the box to standard settings by
Safelock Systems Ltd, but there are many
additional features that can be enabled on
request such as:
DUAL MODE
Dual mode requires two valid codes to
be entered to open the lock.
DUAL LOCKING
MiniTech keypad can control up to two
locks, of any type.
LOCKSMITHJOURNAL.CO.UK | MAR/APR 2019
Sponsored by ERA - Total Security
ALARM SIGNALS – INPUT
AND OUTPUT
With the addition of an alarm interface,
MiniTech can send an output signal to
an alarm if a Duress code is entered. A
Duress code allows the lock to be opened,
but sends a silent alarm, which is used to
notify others that the user is being forced
into opening the lock. From an alarm
system or key switch, an input signal can
disable the lock completely.
BOLT MONITORING AND
BOLT SWITCH CABLES
The MiniTech keypad can sound a
warning if the bolt is left open for too
long. On some locks, cables originating
from the lock’s circuit board can be
connected to a door switch, so that the
audit records whether the safe door is
open or closed.
DYNAMIC CODES (ONE-
TIME CODES - OTC)
With the addition of computer
software and on initial setup, MiniTech is
compatible with Tecnosicurezza’s Dyama
system, which allows one-time codes to be
generated for cash-in-transit couriers, for
any dynamic user, at any time.
Installation and full operating
instructions are available on Safelock
Systems’ website, along with full details
about the range of safelocks they stock.
For more detailed technical information,
including drill points and reset
instructions, please contact the team.
www.safelocksystems.com